Pallet racks and accessories

Our 3 pallet rack models PR4500, PR9000 & PR15000 differ mainly in the load capacity for light, medium & heavy loads. Here the material thickness and dimensions of e.g. the upright profile, cross beams and foot plates differ. The construction of the three models is identical and our accessories are compatible with each other.

The model designation refers to the maximum field load of the individual systems:

• Pallet rack PR4500 - Bay load (max.): 4500 kg / Shelf load (max.): 1500 kg
• Pallet rack PR9000 - Bay load (max.): 9000 kg / Shelf load (max.): 3000 kg
• Pallet rack PR15000 - Bay load (max.): 15000 kg / Shelf load (max.): 4500 kg

This corresponds to a maximum load per pallet of 500 / 1000 / 1500 kg.

The individual shelf upright profiles are assembled with the correct number of cross and diagonal braces, base plates and the appropriate assembly material.

You can find a detailed description of shelf stand assembly in our assembly instructions.

Click here for an overview of the individual parts.

The steel thickness of our pallet racks PR4500 and PR9000 is

Steel S-355 JR (CRD - Coldrolled steel) 80 mm W x 70 mm D x 1.5 mm material thickness.

The steel thickness of our pallet rack PR15000 is

Steel S-355 JR (CRD - cold rolled steel), 100 mm W x 7 0 mm D x 2 mm material thickness.

Of course, we also offer shelves in customized dimensions.
Please send us your request by e-mail, fax or contact us by phone.

You can find our contact details here.

We offer you the common heights from 200 cm to 750 cm in 50 cm steps. For individual heights, the shelf supports are cut to size on request or manufactured individually according to your requirements.

Fixing our shelving to the wall is not permitted.

According to the guidelines of the German Social Accident Insurance DGUV 208-061, DIN EN 15512 & DIN EN 15635, pallet racking must be anchored to the floor

Storage racks must be fixed to the floor if the depth/height ratio is greater than 5:1. No fixing is required below this ratio.

Our spacers are used exclusively for parallel positioning of our shelving.

The steel thickness of the cross beams for pallet racks is 1.5 mm.

The bay load (C) is the total load-bearing capacity of a shelf bay / the load between two shelf uprights. Your own weight does not count here.
The maximum weight that rests on the individual shelf / rack is called the shelf load (B). The sum of the shelf loads must not exceed the bay load.
Point load (A) are the forces acting on the floor in a point-like manner, also known as individual load.

The individual levels can be hung or attached individually as desired in a grid spacing of 5 cm.