Cantilever rack configurator
The cantilever shelving configurator from TOPREGAL takes you to your individually planned cantilever shelving system in just a few clicks. The user-friendly interface of the cantilever shelving configurator makes planning easier and allows you to design the shelving to measure. With the practical share function, you can also save the planning afterwards and send it as a link to the entire team.
The sketch shown in the cantilever rack configurator is a compilation of the individual parts required for the configuration and not a construction plan. If you cantilever racking in different heights, with different levels and / or varying arm lengths, please configure one individual shelving unit first and then, as an add-on unit, the second individual shelving unit with different configurations (height / levels / arm depths). The enclosed assembly instructions are essential for correct assembly. We will be happy to help you with your desired configuration. The dimensions given are approximate and may vary by a few centimeters. Therefore, please contact us if you require the exact dimensions for your desired cantilever rack. All specifications refer to evenly distributed loads. When loading your shelving, the upright and arm load as well as the load on the supports must not be exceeded. When using our shelving, the current guidelines of the German Social Accident Insurance (DGUV:108-007formerly BGR234). You are obliged to observe the relevant rules for shelf assembly and the selection of a suitable installation site, in particular checking the floor conditions and load. TOPREGAL accepts no liability for accidents or damage caused by improper use. If you have any questions on this subject, please contact our expert advisory team.