Pallet rack configurator
Your bespoke shelving system is just a few clicks away. The easy-to-use online configurator for pallet racks is a great tool to help you with your planning. With the practical sharing function, your planned project can be saved and sent as a link.
All data refer to evenly distributed loads. When loading your shelving unit, the shelf load and bay load must not be exceeded. In principle, the current guidelines of the German Social Accident Insurance (DGUV:108-007, formerly BGR234) apply when using our racking. The customer shall be obliged to observe the rules set out therein for assembly and selection of a suitable assembly location, in particular the examination of the floor conditions and loading. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have.
In the case of adjacent pedestrian traffic and other traffic routes, the outermost uprights must be at least 500 mm higher than the top storage level in order to protect against falling stored goods. For this purpose, you can configure an end stand elevation in the first and last field.
The dimensions given are approximate and may vary by a few centimetres. Contact us if you need the exact dimensions for your desired shelf.
A new warehouse is being set up, expanded or a move is imminent? With the practical online pallet rack configurator you can plan the number of pallet racks in advance: define the width of the rack, the height and the number of levels of the cross beams. These levels can optionally be equipped directly with decking - here you can choose between wood, steel or grating levels in the drop-down selection field.
No matter whether single-sided pallet racking or double-sided. At the push of a button, you double your planning, adjust the maximum possible load of the Euro pallet or specify the shelf depth. The online configurator immediately calculates the possible number of Euro pallets and adjusts the display in the header of the planning sketch.
In the upper area of each rack field, adjustments are made to the entire rack - if an individual level is to be changed, a pencil appears on the corresponding level, which opens an editing window. Crash protection/impact protection for your online planned pallet rack can be found in the lower rack editing icon. If you want a 50cm increase at the rack headers, select the end post increase at the outer rack bays.
It is just as easy to add another shelf bay as it is to remove one or add the entire design to the shopping cart. With the trash can icon you reset the entire planning to the original state and you can plan another individual pallet racking system online. Save for later, share your planning with your colleague or supervisor very easily with the share function above the planning sketch. The generated link can then be sent by e-mail or saved for later.
The technical data for the configuration can be found at the bottom of the page, as well as further information material about our pallet racks. If you have any questions about our configurator or our pallet racks, or if you would like to talk to an expert, or if you have any other unanswered questions, please contact our customer service via online chat, email or phone.