Tipping skip MK287, 600 mm x 1.155 mm x 850 mm, volume 287 l, SolidHub

Transporting bulk material made easy

The tipping skip, which can be steered perfectly thanks to its compact dimensions of 600 mm x 1.155 mm x 850 mm and its handle, makes it possible to easily transport bulk material. The 76 kg tipping container can be pushed from A to B quite easily thanks to the four 100 mm castors (2 fixed castors and 2 swivel castors with brakes). The castors are made of PU, which makes them shock-resistant and quiet. Smaller obstacles such as kerbs or steps are no problem for them. If the container is filled with a large quantity of bulk goods, it can also be easily lifted and transported with a forklift. Two forklift pockets (190 mm x 100 mm) are fitted beneath the tipping container for this purpose. The entire frame is made from extremely robust cold-rolled steel. This means that the tipping skip can withstand the knocks and impacts that can occur during use. The container on the truck holds up to 287 l of bulk goods or liquids, making it ideal for construction sites or production halls.

Ergonomic emptying

The tipping feature on the transport container makes it easy to empty. The snap-on device, which makes sure that the container does not tip during transportation, can be unlocked at stomach height. After pulling the lever you can tilt the container and easily empty the bulk material by hand. Thanks to the safety chains, it is safe to empty even once the container is released. 

If any liquids, such as oil or water, have been collected in the tipping skip, they can simply be drained through an outlet valve on the side of the container. This saves time and energy, making it more efficient than tipping the container.

With this equipment, the tipping skip is the ideal transportation solution for a range of uses.

Note:

Please note that the use of the attachment shifts the centre of gravity of your forklift truck. For more detailed information, refer to the heavy load diagram and the centre of gravity of your forklift truck.
The attachment is not suitable for pallet trucks, but for forklift trucks. Before purchasing, please check whether the attachment is compatible with your forklift truck (fork tine cross-section up to max. 190 mm x 100 mm).

Please inform yourself about the nationally relevant regulations in the country of use before you operate the device. The user is responsible for initial operation and for selecting the appropriate personnel for this purpose.