All products

1,2 m worktable storage rack / extension table with perforated rear panel 750 - 1.150 mm table height / 60 cm deep with 2 levels incl. kanban shelves
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 

Discounts of up to 10% on the value of your cart!
2.000
3 %
5.000
5 %
10.000
10 %
Technical data & downloads
Article No. 89747
  • Model
    MFW1000-AT
  • Beam length
    1.100 mm
  • Version
    extension table
  • Number of levels
    2
  • Mobile
    no
  • Rack layer
    wood
  • Width
    1.200 mm
  • Depth
    600 mm
  • Height
    750 mm - 1.150 mm
Delivery volume
  • 1 x storage rack upright / 0,75 m high with 40 cm height-adjustable foot part / 60 cm deep with covers for rack upright
  • 4 x storage-rack single beam 110 cm, compartment load capacity: 500 kg
  • 2 x storage-rack kanban shelf 110 cm wide / 60 cm deep
  • 0 x storage-rack kanban shelf 220 cm wide / 60 cm deep
  • 1 x storage-rack perforated rear panel110 cm wide, 50 cm high
  • All accessories such as screws, nuts and all material required for assembly
  • Assembly instructions
  • Load capacity labels in accordance with German DGUV 108-007 specification
  • 5 years warranty
  • Angled wooden board for quick removal of goods
  • Modular system allows combination with other rack types
  • Bright signal colours of orange and blue
  • Self-securing rack layers thanks to the practical stepped beams

The easy way to extend storage racks: the extension table from TOPREGAL

This extension table with compact dimensions of 1,2 m x 60 cm x 0,75 m is an easy way to extend your TOPREGAL storage rack. Thanks to the modular system, you can attach this extension table to any rack type from our storage rack range. This includes our tyre racks, kanban racks, workbenches and much more.

Practical and with kanban boards: the worktable from TOPREGAL

This worktable is fitted with 2 wooden shelves, which are inserted at an angle of 20 degrees. This angled position makes order picking easier and improves visibility of the stored parcels as well as removal of small parts from storage bins. The 25 mm-thick wooden boards are made of robust chipboard. The low weight of the shelf support makes it easier to assemble the worktable. Thanks to the special design of our stepped beams, the wooden boards fix themselves in place and are secured against slipping or falling out. These orange painted beams can be attached individually in increments of 50 mm thanks to the plug-in system. Matching round beams are attached as fall protection at the front. These act as stoppers for parcels, bulky goods or storage bins. The height of the overall table can also be adjusted by up to 40 cm. This means you can configure the worktable to suit your needs.

The outer dimension of this worktable is 1,2 m, where the usable contact area, known as the inside dimension, is 10 cm shorter. This can be used for easy storage of dry goods, such as screws, assembly parts and other items.

A blue painted worktable upright comprises a front and a rear upright profile. These are connected by screwed-in cross struts and diagonal struts for stability. The supplied panels finish off the upright at the top and ensure the necessary occupational safety.

All material required for assembly, such as screws and nuts, is included in the delivery volume.

Practical stowing of tools: with the perforated rear panel

The perforated rear panel with a height of 50 cm is attached to the rear upright and is used as push-through protection. It protects stored goods from falling out whenever the worktable becomes full. In addition, the perforated rear panel can be individually equipped with our tool holder sets. This is a neat way to store your tools and other objects, such as storage bins for screws, nuts, washers and other small parts.

......read more
Notes

Important information

All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (DGUV Rule 108-007 / BGR 234) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.

Frequently asked questions
General questions
How is the shipping process and how long is the delivery time for my order?

Your order is usually and depending on stock immediately after receipt of order or payment (depending on the selected payment method) within 24h handed over to the shipping company. The delivery time from this point nationwide is max. 72h (international shipping correspondingly longer). If you have selected an advice, the shipping company will contact you at least one day before delivery to coordinate the delivery date.

You can find more details about the shipping process here.