Tyre Racks
Tyre Racks Top seller
Tire racks type RR2000
Components
- Uprights
- Cross beams
- Axle dimension (bay length)
- Mobile or stationary
- Stand depths available in 40 cm, 50 cm, 60 cm
At a glance
- Rack height: 2 m - 4 m
- Cross beams are the load carriers of a tire rack. Individually height-adjustable in 5 cm increments. Available in 110 cm and 220 cm lengths
- Various supports, extensive range of accessories
- Different depths for different tire and rim sizes
- Simple assembly
Technical information
The right shelf depth for your tire sizes
Our recommendations regarding shelf depth and tire size are based on the average tire size when using the specified inch size.
a) 40 centimeters - 13 to 15 inches
b) 50 centimeters - 16 to 18 inches
c) 60 centimeters - 19 to 21 inches
Number of possible levels (recommendations) based on tire sizes 17 inch + 18 inch
Height of the tire rack
2.0 meters = 3 levels
2.5 meters = 3 levels
3.0 meters = 4 levels
3.5 meters = 5 levels
4.0 meters = 5 levels
Tire rack: mobile or stationary?
With the height-adjustable base with castor, the height of your tire rack or tire trolley can be adjusted by up to 40 cm. This results in individually adjustable heights of 89 to 254 cm, depending on the type and basic size selected.
 |  |
Bay, shelf and point load
a) Point load
With an evenly distributed load, the maximum point load is 1000 kg. This corresponds to the load transferred from the rack upright to the floor.
b) Shelf load
Total load capacity per traverse level or per shelf. Maximum 400 kg per level.
c) Bay load
Total load capacity between two uprights: stationary maximum 2,000 kg, mobile maximum 500 kg.
Floor anchoring with base plate
- Floor anchoring is achieved by using M8x55 bolt anchors
- Drill holes with a diameter of 8 mm and a depth of 80 mm
- Blow out the holes
- Drive the bolt anchor into the drilled hole
- Tighten the nut with an open-end wrench or similar
If the height of the top shelf level is less than five times the shelf depth, the shelf does not need to be fixed or secured against tipping. Please ensure that the bolt anchors are fastened correctly. Our in-house assembly team will be happy to take care of the proper assembly of your tire racks.
Axle dimensions
The axle dimension describes the width of a rack bay and the distance between two uprights. We offer axle dimensions in widths of 110 and 220 cm. The axle dimensions can be freely combined with each other. Configure tire racks individually with your desired bay lengths. Thanks to the modular design, the racks can also be extended at any time.
Securing the beams
Set up the pre-assembled uprights, hang the crossbars on both sides at the required height in the upright profile and insert the locking pins into the hole provided in the crossbar. The crossbars are hooked in at 50 mm intervals.
 |  |
Tire rack with supports
You can equip individual levels of your tire racks with a shelf to store useful items such as tools for fitting, rim cleaner, grease and wheel nuts. In this way, a tire rack can be adapted to individual needs.
We offer various shelves in our range: Grating, wood and steel. Below we will inform you about the features of the individual versions.
1. Grating support
The ideal solution for storing hazardous substances or liquids.
2. Wooden support
The perfect choice for storing dry products such as cartons or storage boxes.
3. Steel support
Ideal for storing liquids, such as paints or oils, as it is washable.
Application example of a tire rack
Tire racks for professional storage of tires and rims
In tire racks you store car tires, rims and complete wheels both gently and professionally. The purchase of a tire rack is therefore already worthwhile if you change the car tires twice a year, because the storage of the complete wheels or tires is extremely gentle on the material. Thus you can avoid pressure marks by wrong storage purposefully. TOPREGAL tire racks are designed to minimize the contact area of the tires on the rack. Thanks to the step crossbars, this contact surface is optimally distributed over the entire tire.
It does not matter whether you want to store tires, rims or complete wheels: We offer the right rack depth for all common tire sizes. Three available depths can be easily selected in the configurator. In the smallest version, the basic rack offers space for eight wheels. Thanks to the modular design, any number of tire racks can be combined and extended. The crossbars can also be individually hooked in at different heights.
The assembly of the rim rack is very simple, as it is a plug-in system. The crossbars are simply hooked into the uprights of the rack. If you prefer to store the tires on the wall, you can order the available wall bracket directly and attach the tire rack to the wall with it. For transportation to the car or other places of use, we also offer our tire storage systems as tire carts. Equipped with four swivel castors, our mobile tire racks offer maximum flexibility and are easy on the back.
