Post-hole digger EBM540 incl. earth auger for tractor, drilling diameter 220 mm, drilling depth 600 mm
- The handy EBM540 post-hole digger can be mounted to tractors with a category 1 three-point hitch
- Its light weight makes it easy to mount the hydraulic device
- The accompanying PTO shaft is included
- A slip clutch protects the engine and gearbox from damage if the auger gets stuck
- The handy EBM540 post-hole digger can be mounted to tractors with a category 1 three-point hitch
- Its light weight makes it easy to mount the hydraulic device
- The accompanying PTO shaft is included
- A slip clutch protects the engine and gearbox from damage if the auger gets stuck
-
ModelEBM540
-
Weight85 kg
-
ColourBlue
-
SurfacePainted
-
Width750 mm
-
Depth600 mm
-
Height1.200 mm
-
Outer diameter220 mm
-
Rotational speed540 rpm
-
Length1.200 m
- 1 x post hole digger, Cat 1 suspension, EBM540
- 1 x PTO shaft
- 1 x earth auger diameter 220 mm, drilling depth 600 mm
- 12 Months warranty
- The handy EBM540 post-hole digger can be mounted to tractors with a category 1 three-point hitch
- Its light weight makes it easy to mount the hydraulic device
- The accompanying PTO shaft is included
- A slip clutch protects the engine and gearbox from damage if the auger gets stuck
Sink posts without any problems
This is possible with our post hole digger EBM540. With a rotation speed of 540 rpm, the PTO enables the earth auger to dig through even the hardest and driest soil. The earth auger consists of two clockwise rotating screws, which are equipped with replaceable and hardened cutting edges at the tip. To enable smooth drilling into the ground, this auger is also equipped with a replaceable tip.
The low weight of 85 kg and the compact dimensions of 750 mm x 600 mm x 1.200 mm of the entire assembly allow the post hole digger to be easily mounted on a category 1 three-point hitch. The 1290 mm long PTO shaft hangs below the linkage. The post hole digger is equipped with both a slip clutch and a shear bolt. These protective devices prevent damage to the engine or transmission should the earth auger get stuck in ground that is too hard.
The transmission power of the tractor to which the post hole digger, including the PTO shaft and earth auger, is attached should be between 25 and 50 hp.
The drill bit for the post hole digger
The solid but effective EB220 earth auger enables holes to be drilled in soft to hard ground. The drill diameter is 220 mm, with a maximum drilling depth of 600 mm. This is possible thanks to the 1.200 m length of the entire drill and the hardened and replaceable drill bits. Both the tip and the cutting edges, which are attached directly to the start of the auger, are made of hardened steel and are therefore ideal for penetrating even harder ground. The low weight of the earth auger (21 kg) makes it easy to handle and convenient to attach to the post hole digger.
The right tool makes all the difference. Choose the post hole digger EBM540 incl. earth auger EB220 now.
Please inform yourself about the nationally relevant regulations in the country of use before you operate the device. The user is responsible for initial operation and for selecting the appropriate personnel for this purpose.
Your order will usually be handed over to the shipping company within 24 hours of receipt of the order or payment (depending on the payment method selected), depending on stock levels. From this point on, the delivery time within Germany is a maximum of 72 hours (international shipments take correspondingly longer, please note the information directly on the respective item). If you have selected an advice note, the shipping company will contact you at least one day before delivery to arrange the delivery date.
