Fork extension for forklift, 1.830 mm, max. WLL 3.000 kg, SolidHub
- Closed fork extension with a support surface length of 1.830 mm
- Safe extension of the fork support surface of your forklift truck
- Socket pins with cotter pins secure the GV1830 from slipping down
- High maximum load of up to 3.000 kg per fork pair
- Visually matches any forklift thanks to the black paint finish
- Closed fork extension with a support surface length of 1.830 mm
- Safe extension of the fork support surface of your forklift truck
- Socket pins with cotter pins secure the GV1830 from slipping down
- High maximum load of up to 3.000 kg per fork pair
- Visually matches any forklift thanks to the black paint finish
-
ModelGV1830
-
Max. load3.000 kg
-
Fork length1.830 mm
-
Weight70 kg
-
Width170 mm
-
Depth1.960 mm
-
Height80 mm
-
Height fork opening55 mm
-
Width fork opening135 mm
- 1 x pair of fork extensions for forklift trucks 1.830 mm, max. load 3.000 kg Fork cross-section up to 135 x 55 mm
- 12 Months warranty
- Closed fork extension with a support surface length of 1.830 mm
- Safe extension of the fork support surface of your forklift truck
- Socket pins with cotter pins secure the GV1830 from slipping down
- High maximum load of up to 3.000 kg per fork pair
- Visually matches any forklift thanks to the black paint finish
The closed fork extension with a load capacity of 3.000 kg per pair has a fork length of 1.830 mm. This makes the SolidHub Fork extension is an optimal helper when goods have to be transported or lifted that are longer than the forks of the existing forklift truck. The fork extensions are suitable for a fork cross-section of up to 135 x 55 mm and are used to extend the useful fork area of your forklift truck. Quick, convenient and safe, they are fitted in no time at all and locked behind the back of the fork with push-in bolts.
Important:
The fork extensions are only suitable for forklift trucks and not for high lift trucks (e.g. HE1200/3, HWE15).
Please note that a fork extension shifts the load centre of your forklift truck. For more detailed information, please refer to the heavy load diagram and the load centre of your truck. Furthermore, the extension must rest at least 60% on the forks of the truck.
Before purchasing, please check whether the fork extension is compatible with your forklift truck (fork cross-section up to max. 135 x 55 mm, length from min. 1098 mm).
Fork extension for 1.830 mm forklift, max. WLL 3.000 kg from SolidHub
Please inform yourself about the nationally relevant regulations in the country of use before you operate the device. The user is responsible for initial operation and for selecting the appropriate personnel for this purpose.
The fork extensions are secured with a pin, which is fixed behind the forks by a split pin. This prevents the forks from slipping down.
The term "open" or "closed" describes the nature of the underside of a fork extension. In the case of open fork extensions, there is no metal under the fork and therefore they do not enclose the forks of the forklift. This can cause the extensions to lever upward if care is not taken. Closed fork extensions are therefore safer by reducing the potential for accidents.
The 60 % rule applies to fork extensions. This means that at least 60% of the fork extension must rest on the actual forks of the forklift truck. Before purchasing, check whether the forks of your forklift truck have the corresponding dimensions.
Your order will usually be handed over to the shipping company within 24 hours ofreceipt of the order or payment (depending on the payment method selected), depending on stock levels. From this point on, the delivery time within the Federal Republic of Germany is a maximum of 72 hours (international shipments take correspondingly longer, please note the information directly on the respective item). If you have selected an advice note, the shipping company will contact you at least one day before delivery to arrange the delivery date.
