Carport - roof substructure DK10-420/108 incl. 10 solar modules, 4,2 kWp Power, SoloPort
- Particularly easy to install thanks to the 273 kg lightweight aluminium substructure
- Simple assembly principle thanks to intelligent design
- Sustainable power generation with a peak output of 420 Wp
- Weatherproof, thanks to the IP68 protection class
- Highest product quality for long and reliable use
- Particularly easy to install thanks to the 273 kg lightweight aluminium substructure
- Simple assembly principle thanks to intelligent design
- Sustainable power generation with a peak output of 420 Wp
- Weatherproof, thanks to the IP68 protection class
- Highest product quality for long and reliable use
-
ModelDK10-420/108
-
VersionCarport-roof
-
Max. solar module power (STC)420 Wp
-
Output power of solar modules4,2 kW
-
Weight273 kg
-
ColourSilver
-
Width3.640 mm
-
Depth5.800 mm
-
Height180 mm
-
Assembledno
-
Protection classIP68
-
Range of applicationOutdoor
-
Working temperature-40 °C - 85 °C
- 10 x SPM420/108 solar module with 7532 connection
- 6 x cross members incl. cover flaps
- 3 x side rails with rain gutter
- 18 x cross connection / cross clamp
- 30 x clamp for solar module mounting
- 12 Months warranty
- Particularly easy to install thanks to the 273 kg lightweight aluminium substructure
- Simple assembly principle thanks to intelligent design
- Sustainable power generation with a peak output of 420 Wp
- Weatherproof, thanks to the IP68 protection class
- Highest product quality for long and reliable use
Lightweight and robust construction for easy installation and secure hold
Our roof substructure DK10-420/108 has been specially developed for the installation of solar modules and offers an efficient and robust solution for your solar projects. With a length of 5.800 mm and a width of 3.640 mm, it is optimally dimensioned to accommodate 10 solar modules.
The construction is made of high-quality aluminium, which offers both lightness and stability. With a weight of only 273 kg, it is light enough to allow easy installation on roofs and transport, and has the necessary robustness to ensure a secure hold for the solar modules.
Utilise the full potential of your solar modules with the DK10-420/108 roof substructure from SoloPort
The roof substructure is designed to accommodate 10 solar modules, each of which can deliver an output of 420 Wp and a voltage of 31,6 Vmp. This enables it to generate a considerable amount of solar energy and feed it effectively into your power grid.
Our solar modules also fulfil the requirements of IP protection class IP68. This means that they are completely dustproof and protected against permanent immersion in water. The solid solar modules can also withstand outdoor temperatures between -40 - 85 °C, so you can be sure that your solar modules will withstand any weather. With an efficiency of 21,51 %, they are also extremely efficient.
Use the DK10-420/108 roof substructure to utilise the full potential of your solar modules and generate sustainable energy for your application independently.
Important note:
The installation of the roof substructure is standardised to ensure the simplest possible assembly. Fastening to the respective substrate (house, garage, carport roof, etc.) is the responsibility of the operator. SoloPort will be happy to advise you on your application, but due to the large number of different roof surfaces, we cannot guarantee standardised installation on these.
Zero tax rate for photovoltaic operators
As of January 1, 2023, the following applies to operators of photovoltaic systems: according to Section 12 (3) of the German VAT Act (UStG), VAT is reduced to 0% for the purchase and supply of solar modules, including the components essential to the operation of a photovoltaic system and the storage devices used to store the electricity generated by solar modules. Prerequisite: the photovoltaic system is located on or near (private) dwellings and public and other buildings used for activities serving the public good.
