This online shop uses cookies to provide you with an optimal shopping experience. For example, session information or language settings are stored on your computer. Without cookies, the functionality of the online shop is limited. If you do not agree, please click here. OK, got it

16% discount: Save this month with pallet racks!

16% discount: Save this month with pallet racks!

11.3m pallet rack (type: PR9000) 2.5m high / 110cm deep with 2 levels for 36 euro pallets.

Discounts of up to 10%
on the value of your cart!
Overview / specification
  • Width
    11,3m
  • Height
    2,5m
  • Depth
    110cm
  • Number of layers
    2 levels
  • Beam length
    270cm
  • Max. load per pallet
    1000KG
  • Max. load per layer
    3000KG
  • Rack layer
    Without
  • Surface
    Painted
Description
New, complete pallet rack with DIN EN 15512-tested load capacity of 3000kg per beam level, corresponding to 1000kg per pallet and a max. unit load capacity (total load capacity between 2 rack uprights) of 9000kg.

Alternatively, we can also offer you our pallet racks with 38mm-wooden, galvanised mesh or steel shelves.

The beams, powder-coated in pure orange RAL 2004, are easily attached to the uprights and secured using safety pins to prevent them accidentally being lifted out. The beams can be attached at individual heights in increments of 50mm.

The pallet-rack uprights (powder-coated in Sapphire blue RAL 5003) consist of a front and rear upright profile, which are screwed together by the screwed-in cross and diagonal struts, as well as 2 foot plates, which are fixed to the floors using M12 x 100mm bolt anchors to ensure stability.

This flexible type of rack can be expanded and adapted to your requirements at any time: both by installing further levels and adding additional units to the length (possible unit lengths 180cm, 270cm, 360cm).

All assembly material such as foot plates, screws, nuts, bolt anchors and all small parts required for assembly are included in the price and delivery.

Safety-relevant and useful accessories for this type of rack, such as collision protection, galvanised mesh shelves or push-through protection can be found here.

Delivery volume
  • 5 PR9000 uprights, 250cm high / 110cm deep incl. strutting, unit load capacity: 9000kg (RAL 5003)
  • 16 PR9000 beams 270cm wide incl. safety pins, compartment load: 3000kg (RAL 2004)
  • All material required for assembly such as foot plates, screws, nuts, bolt anchors is included
  • Load capacity labels according to DGUV 108-007 (formerly BGR 234) specifications
  • Assembly instructions
Discounts of up to 10%
on the value of your cart!
Overview / specification
  • Width
    11,3m
  • Height
    2,5m
  • Depth
    110cm
  • Number of layers
    2 levels
  • Beam length
    270cm
  • Max. load per pallet
    1000KG
  • Max. load per layer
    3000KG
  • Rack layer
    Without
  • Surface
    Painted
  • Tested according to DIN EN 15512
  • 5 years warranty
  • Modular design - expandable at any time
  • All small parts & load capacity labels included
Important information about our racks

All data refer to evenly distributed loads. When loading your shelves, the load capacity for the compartment and the unit must not be exceeded. In principle, the current guidelines on health and safety at work (DGUV 108-007 / BGR 234) apply when using our shelves. TOPREGAL does not accept any liability for accidents/damage caused by improper use. Our expert team of consultants will be happy to answer any questions you may have.

Dimensions given are approximate and may vary by a few centimetres. Please contact us if you need the exact dimensions for your desired shelf.