+++ Celebrate 15 years of TOPREGAL with us - in April: 15% additional discount - up to 58% savings possible! +++

All products

6,1 m cantilever rack KR2500 / Painted / One-sided / 2 m high / 5 levels / 50 cm cantilever depth
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 

Discounts of up to 10% on the value of your cart!
3 %
5 %
10 %
Technical data & downloads
Article No. 15472
  • Model
  • Max. Load per stand
    1.250 kg
  • Version
  • Number of levels
  • Rack layer
  • Arm spacing
    280 mm
  • Surface
  • Width
    6.100 mm
  • Depth
    500 mm
  • Height
    2.000 mm
  • Axle dimension
    1.200 mm
Delivery volume
  • 6 x single-sided upright for cantilever rack (type: KR2500) with welded-on foot and 50 cm-long cantilevers
  • All accessories, such as foot plates, screws, nuts and all assembly material
  • Load capacity labels in accordance with German DGUV 108-007 specification (BGR234)
  • Assembly instructions
  • 5 Years warranty
  • Ideal for storage of long goods
  • Can be loaded with up to 1.250 kg per unit
  • Welded feet and arms for a robust construction
  • Very quick and easy to assemble

This extra-robust cantilever rack with a width of 6,1 m is 2 m high and has 5 levels with a cantilever depth of 50 cm. Thanks to the single-sided design with welded-on cantilever arms, you can load each upright with a maximum of 1.250 kg, where each cantilever has a maximum load of 250 kg.

The 50 cm deep cantilevers in the signal colour of blue are ideal for the storage of long goods. 

The individual uprights are screwed together with two cross struts and diagonal struts (axial dimension 1.200 mm). Each cantilever has a width of 30 mm and features a 50 mm-high roll-off protection. The 60 cm-long foot part has a depth of 50 cm, a width of 50 mm and a 70 mm-high roll-off protection. This means the foot parts can also be used as a storage level. 

The distance between the foot level and the first cantilever level, as well as the cantilever distance between the remaining cantilever levels, is 280 mm.
The rack is secured to the floor at each foot part with floor fixtures, each with 4 bolt anchors (M10 x 100 mm). The material required for assembly as well as assembly instructions and load capacity labels are included in the delivery volume.

......read more

Important information

All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (DGUV Rule 108-007 / BGR 234) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.

 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
(ᴓ 4.90 / 5.00)
Our independent rating partner "Trusted Shops" has established various measures to ensure that the ratings shown here only come from consumers who have actually purchased the products. A detailed description of the measures can be read at Trusted Shops.
Relevant ratings
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
19.07.2023 based on Art. No. 15469
ausgezeichnet !
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
09.11.2022 based on Art. No. 15469
Solid and easy to assemble. Super price-performance ratio
Read original
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
24.08.2022 based on Art. No. 15471
Fast delivery, top quality. Price performance is right!
Read original
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
29.06.2022 based on Art. No. 15471
The shelf is neatly finished and the delivery was super packed. Highly recommended
Read original
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
17.03.2022 based on Art. No. 15457
stable and good
Read original
Frequently asked questions
Questions about the product
Is it possible to combine different cantilevers?

Combining cantilevers of different models, such as between KR3000 and KR6000, is technically not feasible. However, a mixture of different arm lengths, for example 50 cm and 100 cm, is certainly feasible. The important thing here is that the cantilever arms do not protrude beyond the cantilever feet. A combination of 50 cm and 100 cm cantilever arms would require a shelf upright with a depth of 100 cm.

In which designs are cantilever fields available?

Depending on the type of cantilever racking, our cantilever bays are available in painted and hot-dip galvanized versions (both versions for the KR3000/KR6000).

How are the cantilever fields fixed?

The individual cross and diagonal braces are mounted to the bracket of the shelf uprights with the corresponding hexagon bolts, hexagon nuts and washers.

How are the struts in the fields divided?

Depending on the height of your shelves, the number of struts (cross and diagonal struts) varies.

You will find the appropriate number of braces in the article description and in the assembly instructions.

What does axial dimension mean?

The axial dimension is the internal dimension between two shelf uprights. Depending on the cantilever type, we offer these fields in 120 cm (KR2500) and in 100 cm / 150 cm (KR3000 / KR6000).

Why is a rubber strip for cantilever racks important and how is it attached?

A rubber strip on cantilever racks is primarily used to protect your stored goods and the cantilevers from potential damage. No additional assembly is required to attach them. The rubber strips are simply glued directly to the desired cantilever arm. For our models KR3000 and KR6000 we offer special matching rubber strips.

How do bay sizes vary by cantilever rack type?

Available bay sizes vary depending on the specific cantilever rack model:

  • KR2500: Provides bays 120 cm wide, bracing included.
  • KR3000: Offers bays in 100 cm and 150 cm sizes, both including bracing. These are also available in a hot-dip galvanized version.
  • KR6000: This model also offers 100 cm and 150 cm bays with bracing and is available in a hot-dip galvanized version.
Which screws are used for cantilever racking assembly?

The scope of delivery includes the appropriate number of screws for cantilever racking assembly. The following screws are used for a cantilever racking system:

Bolt anchor, hexagonal bolts / nuts, washer, compensation wedge etc.

Is it possible to adjust the height of the cantilevers?

With certain models of our cantilever racks you can flexibly adjust the height of the cantilever arms. The KR3000 and KR6000 models offer the possibility to adjust the cantilever arms individually in 5 cm steps. In contrast, the arms of the KR2500 system are permanently welded and do not allow any height adjustment.

For which stored goods are cantilever racks suitable?

Cantilever racking is ideal for the storage of long goods, e.g. wooden beams, steel profiles, pipes and much more. You can additionally equip the cantilever racking with wooden or grating floors, so that the storage of other stored goods is also possible.

Does my shelf have to be fixed in the floor?

Cantilever racking is always fixed by anchoring it to the ground.

The desired shelf dimensions cannot be found. Do I also receive shelves in individual sizes?

Of course we also offer shelves in individually adapted dimensions.
Please send us an inquiry by e-mail to info@topregal.com, by fax or call our customer hotline +49 (0) 7158 91 81 500.

You can find our contact form here.

General questions
How is the shipping process and how long is the delivery time for my order?

Your order will usually be handed over to the shipping company within 24 hours ofreceipt of the order or payment (depending on the payment method selected), depending on stock levels. From this point on, the delivery time within the Federal Republic of Germany is a maximum of 72 hours (international shipments take correspondingly longer, please note the information directly on the respective item). If you have selected an advice note, the shipping company will contact you at least one day before delivery to arrange the delivery date.

Further details on shipping processing can be found here.