Mobile Racks & Tables
Mobile metal racks and tables
- Rack/table height 89 to 254 centimetres
- Upright frame depths available in 40, 50, 60, 80, 100 or 120 centimetres
- Beams are the load carriers of a storage rack; individually height-adjustable in increments of five centimetres and available in 110 and 220 centimetres
- Various decking options, extensive range of accessories
DGUV 208-061 tested- Straightforward assembly
- Competitive pricing
- All parts included
DGUV 208-061 testedDownload area
Mobile racking in various designs
Mobile tyre racks & tyre trolleys
Mobile storage racking & work tables
Mobile inclined shelving units and inclined shelving tables
Freely configurable mobile racking & trolleys
Overview of uprights – mobile racking and tables
Painted uprights - heights
Uprights
Depths
Bay and shelf load
Bay load maximum 500 kilograms
- Total load capacity between 2 uprights
Maximum shelf load 500 kilograms per level
- Total load capacity per beam level or per shelf
Upright assembly
Centre-to-centre distances
- The centre-to-centre distance describes the width of a shelving bay and the distance between two uprights.
- We offer centre-to-centre distances in widths of 110 and 220 centimetres.
- Configure mobile racking or mobile tables individually with your desired bay lengths.
Installing the beams
Technical information
Securing the beams
Required components: preassembled rack upright, beam, locking pin
Set up the pre-assembled uprights and hang the beams at the required height in the upright profile on both sides. Then insert the locking pins into the hole provided in the beam.
The beams are hung in a grid of 50 millimeters. Please ensure that the last beam is fitted at least 50 centimetres before the end of the upright!
Decking for mobile racks and tables
Optional decking for the tyre rack
You can also equip individual levels with shelf decking to store useful items such as tools for fitting, wheel rim cleaner, grease, wheel nuts or similar. This allows you to adapt mobile racking or mobile tables and trolleys to the individual requirements of each warehouse.
Wooden decking
Ideally suited for storing dry products, such as cartons or storage boxes.
Steel decking
Steel decking are washable and therefore ideal for storing liquids such as paints or oils.
Grating
Perfect for storing hazardous substances or liquids.
Multiplex board
The multiplex board is very hard-wearing and is therefore ideal as a worktop. The surface is sealed with linseed oil varnish and can therefore be wiped clean at any time.
Installing the decking
Assembly of height-adjustable base and castor
Required components: upright profile, height-adjustable base section, mobile base section with brake, M8x20 screws, washers, M8 nuts
The upright profiles are slid over the base section and fastened at the desired height using three M8x20 screws and washers. The height can be adjusted in increments of five centimetres.
The castor is attached to the height-adjustable base section from below using 4 M8x20 bolts, M8 nuts and washers.
Please note that the castor can be (dis)assembled as required. This allows you to convert the table or rack into a stationary or mobile version at a later date.
Back and side panels
Back and side panels can be fitted between the upright profiles as push-through protection, have a hole spacing of approx. 2.8 centimetres and are therefore compatible with all common applications.
Side panels are available in depths of 60 and 80 centimetres. We offer the rear panels in widths of 110 and 220 centimetres.
Rack with side panel and tool holders.
Rack with back panel and tool holders.
Tool holder sets
Our tool and machine holder sets are designed for use with our own perforated panels and are ideal for storing tools of all kinds.
The sets contain various tool holders in different lengths and designs. The individual elements can be attached to the perforated panels using a simple plug-in system without any assembly material.
Mobile lockers & cabinets
Thanks to their special design, our metal cabinets and lockers are compatible with the storage rack 's stepped beams. This means that the lockers can simply be placed on top without further assembly and fix themselves in place.
This allows them to be used as mobile cabinet and locker variants. The high-quality, two-tone metal cabinets can withstand the rigours of everyday workshop use.
Covers for rack uprights
The table uprights are finished at the top with two specially manufactured covers to create a flush finish and improve the appearance and handling.
The cover clips into place and is therefore easy to position.
Tool cabinets
Our tool cabinets are ideal for use in combination with our storage shelving, mobile racking and multifunctional workbenches with a depth of 60 and 80 centimetres.
Thanks to their special design, they can easily be placed on the beam levels and fix themselves in place.
Operational safety in accordance with DIN EN 15635, DGUV 208-061
Collision protection for racking systems
Collision protection to prevent possible damage to the rack uprights.
Corner areas must be fitted with collision protection for forklift traffic in accordance with DIN EN 15365 & DGUV 208-061.
Our collision protection is tested and certified in accordance with DGUV 208-061. We supply each collision guard including four bolt anchors for floor anchoring. These are German requirements; the applicable local requirements must be checked.
Each collision guard is supplied with four bolt anchors for floor anchoring.
Accessories for mobile racking & tables
Mobile storage racks and metal racks for flexible applications
All the mobile racks and shelving trolleys shown here are complete configurations selected by us on the basis of the options most frequently requested by customers. We offer a mobile solution for almost every requirement involving a flexibly used rack. Every model is fitted with swivel castors and brakes to provide a high level of mobility and safety in the warehouse. Remove the castors and the mobile racks become stationary heavy-duty racks within seconds.
The storage rack forms the basis for the many mobile racks and worktables displayed here. With only a few clicks, a tyre trolley can be transformed into a mobile storage rack simply by adding wooden decking. Add a round front beam and hook the decking a few grid positions higher to create a mobile kanban rack in no time. If the rack is lower than 1.30 metres, it can be used conveniently as a mobile worktable or workbench. Compatible perforated panels for tool holders, tool cabinets and other accessories complete this flexible workplace solution.