Fully equipped tool trolley WZ220, incl. 220 parts, TecMaschin

The compact helper for tradespeople

Compact and robust, our tool cart WZ220 is the perfect all-rounder for manual work. Its practical dimensions (775 mm x 900 mm x 475 mm) make it comfortable to use while standing or sitting, without excessive bending down or reaching up. Four of the six integrated drawers (542 mm x 60 mm x 400 mm) are already stocked with a large selection of essential tools. The two bottom drawers can be arranged individually. They also have a good capacity (542 mm x 160 mm x 400 mm) for temporarily storing spare parts or protective clothing. This means you always have your mobile workstation with you and every tool you need quickly at hand.

The tool trolley is designed for particularly long service life. Its housing is made of steel, and the edges are fitted with plastic edge protectors to prevent damage from knocks and impacts. The large polyurethane rubber wheels run smoothly and quietly. The two swivel castors beneath the handle have parking brakes to prevent the trolley from rolling away. The trolley is also equipped with two fixed castors. All six fully extendable drawers are mounted on rollers and have a practical locking mechanism, so they stay closed during transport. The comfortable rubber handle on one side of the rolling trolley ensures ergonomic handling of the mobile tool trolley and its contents. This allows you to transport the entire workstation efficiently from one place to another. 

Tools for professionals

The tool trolley WZ220 impresses with its comprehensive selection of tools. Various pliers, screwdrivers, bit inserts and socket sets enable a wide range of manual tasks. The total of 220 parts made of heat-treated cover most screwing, clamping and bending work, and much more besides. Thanks to the high-quality plastic inserts in the four top drawers of the tool trolley, every tool has its own place. This keeps things organized while working and storing the tools, so nothing can be lost or misplaced. The convenient storage surface on top of the tool trolley provides a place to temporarily store small parts such as nuts, screws or wall plugs, or to put down tools briefly during use. Spare parts and any waste produced can also be collected here and transported to their intended destination later. The valuable tools, as well as your small parts and spare parts, can be securely locked away in the tool trolley using the central locking system. This ensures that only authorized persons have access.

Professional tip:

Set up a workbench at a similar height to the tool trolley. This makes working with heavy parts easier because there is no need to lift them high.

Contents:

Drawer 1:

1/4“ socket set:

• 1 x ratchet 
• 1 x screwdriver handle 
• 1 x T-sliding bar 
• 1 x universal joint 
• 1 x 5 cm extension 
• 1 x 10 cm extension 
• 13 x socket (4 – 14 mm)

3/8“ socket set:

• 1 x ratchet
• 1 x universal joint
• 1 x T-sliding bar
• 1 x 7,6 cm extension
• 1 x 15,2 cm extension
• 17 x socket (6 – 22 mm)
• 1 x spark plug socket 16 mm
• 1 x spark plug socket 21 mm

1/2“ socket set:

• 1 x ratchet
• 17 x socket (10 – 32 mm)
• 1 x 12,7 cm extension bar
• 1 x 24,4 cm extension bar
• 1 x T-sliding bar
• 1 x universal joint

Drawer 2:

• 9 x Allen keys 1.5 – 10 mm
• 9 x socket (5 – 13 mm) 1/4“
• 13 x combination ring spanners with ratchet (8 – 22 mm)
• 23 x 2,5 cm-long bits

Drawer 3:

• 1 x pocket key set (7-piece, 2 – 8 mm)
• 7 x precision screwdrivers
• 6 x insulated electrical screwdrivers
• 14 x screwdrivers (7 slotted, 7 Phillips)

Drawer 4:

• 1 x water pump pliers
• 1 x locking pliers
• 1 x combination pliers
• 1 x flat-nose pliers
• 1 x diagonal cutting pliers
• 4 x circlip pliers
• 51 x nails and wall plugs