1.2m mobile worktable storage rack with perforated back panel 89–129cm table height / 120cm deep with 3 levels, incl. galvanised mesh shelves
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Discounts of up to 10% on the value of your cart!
2.000
€
3 %
5.000
€
5 %
10.000
€
10 %
Technical data & downloads
Article No. 85865
-
Back panelWith holed rear panel
-
Width1.200 mm
-
Height1.290 mm
-
Depth1.200 mm
-
Number of levels3
-
Beam length1.100 mm
-
Max. Load per level500 kg
-
VersionBasic table
-
Rack layerGalvanised mesh
-
SurfacePainted
-
VariantStorage rack
-
Mobileyes
- Assembly instructions
- Technical datasheet workbenches & worktable (stationary) (German)
- Technical drawing height adjustable foot part (German)
Delivery volume
- 2 worktable storage rack uprights 89–129cm height-adjustable / 120cm deep with castors (for perforated back panel)
- 6 storage-rack individual beams 110cm, compartment load: 500kg
- 3 storage-rack galvanised mesh shelves 110 x 120cm, load: 500kg
- 3 support bars 120cm
- 1 storage-rack perforated back panel 110cm long, 50cm high
- 2 transport handles – mobile storage rack / pallet rack (incl. assembly material)
- All accessories such as foot plates, screws, nuts and all material required for assembly are included.
- Assembly instructions
New, complete, mobile storage-rack worktable with galvanised mesh shelf for easy storage and transport of goods, parcels, other general items, small parts, liquids or for order picking goods.
Alternatively, we also offer our mobile LR worktables with 25mm-wooden, robust multiplex, kanban or steel shelves.
The outer dimension is 120cm. The usable shelf area (inside dimension) is 110cm per level.
This LR worktable has 3 levels, which are equipped with galvanised mesh shelves.
The shelf and unit load capacity is max. 500kg.
The beams (powder-coated in pure orange RAL 2004) are easily attached to the uprights and secured using safety pins to prevent them accidentally being lifted out. The beams can be attached at individual heights in increments of 50mm.
Mobile worktable uprights (powder-coated in signal blue RAL 5005) consist of a front and rear upright profile, which are screwed together using the screwed-in cross and diagonal struts, as well as 2 castors, which are fitted with locking brakes. The worktable uprights are closed at the top with two specially manufactured panels to increase work safety and to provide a flush finish to the edges.
The work height of the worktable can be individually adjusted in 5cm increments and ranges from 89cm to 129cm. Just adjust the insertion height of the upright at the foot part.
The perforated back panel with a height of 50cm is attached to the back upright. It serves as fall protection and protects the stored goods. In addition, the perforated back panel can be individually equipped with our tool holder sets.
The complete rack is equipped with 4 castors with locking brakes and is therefore suitable for mobile use. This mobile rack is offered especially for commercial and industrial use and is also suitable for robust applications.
All material such as foot plates, screws, nuts and all small parts required for assembly are included in the price and delivery.
Other compatible products and accessories for this rack can also be found in our individual parts category.
Alternatively, we also offer our mobile LR worktables with 25mm-wooden, robust multiplex, kanban or steel shelves.
The outer dimension is 120cm. The usable shelf area (inside dimension) is 110cm per level.
This LR worktable has 3 levels, which are equipped with galvanised mesh shelves.
The shelf and unit load capacity is max. 500kg.
The beams (powder-coated in pure orange RAL 2004) are easily attached to the uprights and secured using safety pins to prevent them accidentally being lifted out. The beams can be attached at individual heights in increments of 50mm.
Mobile worktable uprights (powder-coated in signal blue RAL 5005) consist of a front and rear upright profile, which are screwed together using the screwed-in cross and diagonal struts, as well as 2 castors, which are fitted with locking brakes. The worktable uprights are closed at the top with two specially manufactured panels to increase work safety and to provide a flush finish to the edges.
The work height of the worktable can be individually adjusted in 5cm increments and ranges from 89cm to 129cm. Just adjust the insertion height of the upright at the foot part.
The perforated back panel with a height of 50cm is attached to the back upright. It serves as fall protection and protects the stored goods. In addition, the perforated back panel can be individually equipped with our tool holder sets.
The complete rack is equipped with 4 castors with locking brakes and is therefore suitable for mobile use. This mobile rack is offered especially for commercial and industrial use and is also suitable for robust applications.
All material such as foot plates, screws, nuts and all small parts required for assembly are included in the price and delivery.
Other compatible products and accessories for this rack can also be found in our individual parts category.
Frequently asked questions
General questions
Your order is usually and depending on stock immediately after receipt of order or payment (depending on the selected payment method) within 24h handed over to the shipping company. The delivery time from this point nationwide is max. 72h (international shipping correspondingly longer). If you have selected an advice, the shipping company will contact you at least one day before delivery to coordinate the delivery date.
Suitable products
