Workbench configurator
Overlays
If you wish, you can also select individual supports for your various shelf levels to suit your requirements. The following supports are available for our mobile shelves & tables:
Without support
Ideal for storage of tires and rims
Wooden shelf
Chipboard, for the storage of dry goods, e.g. cartons
Multiplex
Made of beech wood, ideal as worktop
Hot galvanized grid
For storage of e.g. liquids and dangerous goods
Painted steel floor
For storage of e.g. liquids and hazardous goods
Cabinet modules
Select the appropriate cabinet or shelf modules for your multifunctional workbench! Our freely combinable modules can be integrated into the MFW1000 to suit your needs. Use the variable combination to optimize your work processes.
Tool cabinet WST - 110 cm wide
With 2 doors in 60/80 cm depth
Tool cabinet WST - 55 cm wide
With door in 60/80 cm depth
Tool cabinet WS4 - 110 cm wide
With 4 drawers in 60/80 cm depth
Tool cabinet WS4 - 55 cm wide
With 4 drawers in 60/80 cm depth
Tool holders
The TOPREGAL back wall fulfills different purposes:
As a perforated wall to fix your tools and work equipment with the help of tool holders, which are directly attached to the perforated wall. You will find the suitable sets listed below. Alternatively, this back wall can also serve as a drop guard to protect your parts.
Basic set
Tool basic set
Expansion set
Tool extension set
Professional set
Basic set + extension set assortment
All data refer to evenly distributed loads. When loading your shelving unit, the shelf load and bay load must not be exceeded. In principle, the current guidelines of the German Social Accident Insurance (DGUV:108-007, formerly BGR234) apply when using our racking. The customer shall be obliged to observe the rules set out therein for assembly and selection of a suitable assembly location, in particular the examination of the floor conditions and loading. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. The dimensions given are approximate and may vary by a few centimetres. Contact us if you need the exact dimensions for your desired shelf.
A workbench for all purposes
Our workbench MFW1000 - a multifunctional workbench exclusively available at TOPREGAL - is suitable for any purpose. If you want to work with tools, you can use the multiplex board made of robust beech wood and sealed with linseed oil varnish as a support. This support is one of the most chosen equipment for our workbenches. If liquids are handled, the wipeable steel support is the best choice. With the practical grid you get an easy to clean support, which is characterized by a robust finish. Our wooden top made of 25 mm thick glued chipboard is the cheaper alternative to our resistant multiplex top.
Workbench Configurator
With the workbench configurator you are sure to find the right workbench for you and your applications. Additional modules and accessories are displayed directly, as summarized here in detail for you:
The optional perforated back panel turns our workbench into a real organizer: tools, machines or even stacking containers or open fronted storage bins can be easily attached to it. We offer two preconfigured accessory sets here in the store.
Also in the workbench accessories range, we offer integrable tool cabinets and tool drawers as optional modules. The tool cabinets / tool drawers are available in two depths to match the selected workbench. They are lockable and made of robust steel. Visually perfectly matched are the doors / drawer pulls in blue to the body in discreet light gray. Inside the tool cabinet is a shelf, which can be hung variable in height according to your needs. The second module, the tool drawer consists of 4 drawers, each of which is supplied with a compartment divider and is also lockable.
Professional tip: You can also integrate these modules into our storage racks.
Mobile & height-adjustable: The MFW1000
The infinite number of possible uses is not all that the MFW1000 workbench has to offer: The easy-to-mount hard rubber casters turn it into a mobile workbench in no time - the casters can also be added later if you have already purchased a workbench, heavy-duty workbench or work table.
Depending on your needs, you can convert the workbench into a mobile or stationary version at any time with little effort.
The working height of the workbench is optimally adjustable by grid in 5 cm steps. Therefore, the MFW1000 is a popular purchase when a height-adjustable workbench is needed. Another element can also be added to the side if desired. Thus it is possible to extend our multifunctional workbench to a row workbench of any length. Just as you wish and need it.
Quickly assembled and transported
Due to the special plug-in design, the workbench can be assembled and disassembled within a few minutes. Thus, the workbench is ideal to take along even in smaller company cars to any place of use.
Have a look at our short and informative workbench product video!