All products

2,3 m workbench MFW1000 / 80 cm deep / 750 - 1.150 mm high / rack layer Plywood / perforated rear panel

 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
Discounts of up to 10% on the value of your cart!
2.000
3 %
5.000
5 %
10.000
10 %
Technical data & downloads
Article No. 21062
  • Model
    MFW1000
  • Beam length
    2.200 mm
  • Mobile
    No
  • Table layer
    Plywood
  • Width
    2.300 mm
  • Depth
    800 mm
  • Height
    750 mm - 1.150 mm
  • Max. Load per field
    2.000 kg
  • Max. Load per level
    500 kg
Delivery volume
  • 2 x workbench MFW1000 upright 750 - 1.150 mm height-adjustable / 80 cm deep
  • 4 x workbench MFW1000 single beam 220 cm long, compartment load capacity: 500 kg
  • 1 x workbench MFW1000 multiplex board 220 cm wide, 80 cm deep
  • 4 x workbench MFW1000 foot parts 40 cm high, height-adjustable
  • 1 x workbench MFW1000 perforated panel 220 cm long, 50 cm high
  • All accessories such as foot plates, screws, nuts and all material required for assembly
  • 5 Years warranty
  • Custom workbench thanks to the modular system from TOPREGAL
  • Simple storage of tools, small parts and other objects
  • High-quality finish of the frame and rack layers
  • Layout can be adjusted and extended at a later time
  • Maximum load capacity with 500 kg compartment and 2.000 kg unit load

The multipurpose workbench MFW1000 from TOPREGAL: an all-rounder

Discover the many possibilities of our customisable workbenches MFW1000. The patented modular system from TOPREGAL lets you choose and configure a multipurpose workbench that meets your needs, as well as extend it at a later time. This workbench has been specially designed for commercial/industrial operation and is extremely robust.  

The load capacity of this multipurpose workbench speaks for itself: It offers a compartment load capacity of 500 kg, with a maximum load between two uprights, known as the unit load capacity, of 2.000 kg. All load data refer to evenly distributed loads.

The outer dimension of this workbench is 2,3 m, while the usable working area or inside dimension is 10 cm shorter. The special feature of our workbenches of the MFW1000 type is the variability: The height can be adjusted between 750 - 1.150 mm in increments of 50 mm. This improves workplace ergonomics and the working environment. The height of the orange painted beams can also be adjusted in these increments to create an individual compartment size.

Quick and easy assembly: The MFW1000

The orange painted beams are secured using safety pins to prevent them accidentally being lifted out and thus enable safe working. The table uprights are closed at the top with two specially made covers to ensure that they are as flush as possible and to improve the appearance and handling. The cover is simply put on and is thus easy to position.

Our simple plug-in system makes it possible to assemble or disassemble the multipurpose workbench MFW1000 easily. Thus it remains expandable at any time and can be retrofitted. Furthermore, due to its small space requirement, it can be ideally transported when dismantled.

Practical stowing of tools: with the perforated rear panel

The perforated rear panel with a height of 50 cm is attached to the rear upright and is used as push-through protection. It protects stored goods from falling out whenever the multipurpose workbench becomes full. In addition, the perforated rear panel can be individually equipped with our tool holder sets. This is a neat way to store your tools and other objects, such as storage bins for screws, nuts, washers and other small parts.

......read more
Notes

Important information

All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (DGUV Rule 108-007 / BGR 234) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.

Frequently asked questions
General questions
How is the shipping process and how long is the delivery time for my order?

Your order will usually be handed over to the shipping company within 24 hours ofreceipt of the order or payment (depending on the payment method selected), depending on stock levels. From this point on, the delivery time within the Federal Republic of Germany is a maximum of 72 hours (international shipments take correspondingly longer, please note the information directly on the respective item). If you have selected an advice note, the shipping company will contact you at least one day before delivery to arrange the delivery date.

Further details on shipping processing can be found here.