3.600 mm push-through protection for pallet rack PR4500, PR9000, PR15000
★ ★ ★ ★ ★
★ ★ ★ ★ ★
(4)
- Prevents stored goods from slipping through during parallel positioning of racks
- Made of solid, high-quality steel for the ultimate robust design
- Suitable for all pallet rack with unit widths of 3.600 mm
- Assembly material, such as screws and washers, included
- Prevents stored goods from slipping through during parallel positioning of racks
- Made of solid, high-quality steel for the ultimate robust design
- Suitable for all pallet rack with unit widths of 3.600 mm
- Assembly material, such as screws and washers, included
-
ModelPR4500, PR9000, PR15000
-
Weight8 kg
-
ColourOrange
-
SurfacePainted
-
Width3.600 mm
-
Depth40 mm
-
Height80 mm
- 1 x 3.600 mm push-through protection for pallet rack PR4500, PR9000, PR15000
- 5 Years warranty
- Prevents stored goods from slipping through during parallel positioning of racks
- Made of solid, high-quality steel for the ultimate robust design
- Suitable for all pallet rack with unit widths of 3.600 mm
- Assembly material, such as screws and washers, included
Safe storage of pallets
The TOPREGAL push-through protection prevents pallets from being pushed backwards unintentionally. This item has a length of 3.600 mm, is 80 mm high and 40 mm deep. The weight is 8 kg. Screw-on plates and screws for fastening to the shelving system are included and are compatible with all standard pallet racking systems.
Good to know
The push-through protection is part of the safety-relevant accessories for pallet racking. These are fitted to the sides of the racking that are not intended for loading and unloading.
Slip protection is mandatory in the following installation variants:
- Rows of shelving where there is public traffic behind the system must be secured against load units falling down.
- Double shelving that is loaded from two sides with lifting equipment, e.g. forklift trucks or high-lift trucks, must have push-through protection.
The push-through protection, tested in accordance with German DGUV 108-007 regulations, is made of solid steel and can withstand even the highest forces. The rack depth is increased by 180 mm overall by fitting the push-through protection, meaning that the pallet overhang is optimally absorbed by the protection.
Note: The push-through protection is available in two different versions. If you want to use the push-through protection on a third-party rack, please specify this in the ordering process.
Important information
Dimensions given are approximate and may vary by a few centimeters. Please contact us if you need the correct size for your desired product.
Your order will usually be handed over to the shipping company within 24 hours ofreceipt of the order or payment (depending on the payment method selected), depending on stock levels. From this point on, the delivery time within the Federal Republic of Germany is a maximum of 72 hours (international shipments take correspondingly longer, please note the information directly on the respective item). If you have selected an advice note, the shipping company will contact you at least one day before delivery to arrange the delivery date.
