50 m shelving rack FB200 / 30 cm deep / 1,8 m high / 4 levels / rack layer steel / compartment load capacity 200 kg
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Number of levels4
Beam length1.000 mm
Max. Load per field1.000 kg
Max. Load per level200 kg
- x FB200 upright, 1,8 m high incl. foot plate, bolt anchor, cover plates, screws
- x FB200 steel board, 100 cm wide / 30 cm deep incl. mounting struts
- x FB200 beam, 100 cm
- All material required for assembly, such as foot plates, screws and nuts
- Load capacity labels in accordance with German DGUV 108-007 specification (formerly BGR 234)
- Assembly instructions
- 5 years warranty
- Straightforward assembly for a rapid construction
- Simple plug-in system
- High-quality materials for long-term use
- High load capacity per compartment of 200 kg with an evenly distributed load
This fully configured, galvanised shelving rack is quick and easy to assemble thanks to the simple plug-in system. The modular design enables customisation of this rack type. You can decide the distribution of the shelves in advance, and thus select the size of the shelf compartments in increments of 50 mm. It is also possible to expand the shelving rack with further levels as well as by adding units to the width at any time.
This shelving rack offers and incredibly high load capacity. One shelf compartment can be loaded with up to 200 kg. The maximum unit load capacity, corresponding to the total load with even distribution between two uprights, is 1.000 kg. The high-quality steel shelves are installed on 2 longitudinal and 2 transverse support beams to increase the load capacity.
In this rack type, the beams are used to secure the shelves. The integrated kerb makes it easy to insert the shelves. These have a standard length of 100 cm and fit perfectly into the compartments of the shelving rack. This means the rack with its 4 levels is quick and easy to assemble.
This shelving rack with dimensions of 50 m x 30 cm x 1,8 m features an impressive, high-quality finish. Further benefits of this shelving rack include its appealing look and durable construction designed for industrial use. All material required for assembly is included in the delivery volume.
Important information about our racks
All data refer to evenly distributed loads. When loading your shelves, the load capacity for the compartment and the unit must not be exceeded. In principle, the current guidelines on health and safety at work (DGUV 108-007 / BGR 234) apply when using our shelves. TOPREGAL does not accept any liability for accidents/damage caused by improper use. Our expert team of consultants will be happy to answer any questions you may have. Dimensions given are approximate and may vary by a few centimetres. Please contact us if you need the exact dimensions for your desired shelf.
Our shelf racks are a pure plug-in system. No screws and nuts are required for this. Only the base plates are fastened with screws.
Your order is usually and depending on stock immediately after receipt of order or payment (depending on the selected payment method) within 24h handed over to the shipping company. The delivery time from this point nationwide is max. 72h (international shipping correspondingly longer). If you have selected an advice, the shipping company will contact you at least one day before delivery to coordinate the delivery date.