All products

Semi-electric stacker HSE1000/3, lifting height 85 - 3.000 mm, WLL 1.000 kg, SolidHub
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
(64)

Discounts of up to 10% on the value of your cart!
2.000
3 %
5.000
5 %
10.000
10 %
Technical data & downloads
Article No. 108990
  • Model
    HSE1000/3
  • Max. Load
    1.000 kg
  • Mobile
    Yes
  • Max. Lifting height
    85 mm - 3.000 mm
  • Fork length
    1.100 mm
  • Energy source
    Battery
  • Battery
    Lead-acid
  • Battery life
    4 h
  • Charging time
    6 h
  • Weight
    380 kg
  • Colour
    Blue
  • Surface
    Painted
  • Width
    760 mm
  • Height
    2.077 mm - 3.567 mm
  • Tyres
    PU
  • Motor power
    1.500 W
  • Turning radius
    1.350 mm
  • Voltage
    12 V
  • Capacity
    120 Ah
Delivery volume
  • 1 x Semi-electric stacker SolidHub HSE1000/3
  • 12 Months warranty
  • The hydraulic unit provides sensitive, direct steering
  • The motor relays, with their fast response times, have an excellent contact rating and long service time
  • The high-quality hydraulic system ensures stable and reliable operation
  • The emergency switch turns off the power supply immediately in an emergency
  • Guaranteed spare parts supply and customer service

The SolidHub HSE1000/3 semi-electric forklift is equipped with an electric lift motor, moved by muscle power and ideal for small businesses that need to stack and retrieve goods. The manoeuvrable transport tool is an ideal entry-level motorised industrial truck.

The manoeuvrable and stable high-lift truck (as the electric pallet stacker is also called) is a cost-effective alternative to a forklift for businesses that only need to carry out occasional stacking operations (85 - 3.000 mm), loading and unloading. The forks of this SolidHub entry-level model can be locked flexibly to different widths and adjusted very quickly to the required spacing. Simply lift and push them on the fork holder by hand.

The working load limit of 1.000 kg allows it to lift and transport Euro pallets over short distances with ease. The goods are lifted by the electric lifting motor, which is permanently installed in the chassis, and moved manually. A button on the vehicle chassis controls the lifting and lowering of the pallet. If you need to cover longer distances or inclines we recommend the fully electric HE1200/3 high-lift truck, which is electrically supported along the transport path too, unlike this semi-electric forklift.

The ergonomic guide handles on the tow bar make it much easier to push and manoeuvre during day-to-day work. 

The dimensions of the SolidHub semi-electric forklift are perfect for use in a smaller warehouse or production facility with narrow paths. 

With the integrated motor (1.500 W), it can reach the following speeds: 

Lifting speed 

•   loaded 76 mm/s

•    unloaded 143 mm/s. 

Lowering speed 

•    loaded 104 mm/s 

•    unloaded 93 mm/s.

 

The Lead-acid battery is maintenance-free and can be charged comfortably from any normal 230 V socket with the internal charger. The battery has a capacity of 120 Ah and a voltage of 12 V. The red emergency stop button on the vehicle housing turns off the power to the vehicle and immediately stops the motor. Use this button to turn the vehicle on and off. When the battery is fully charged, the semi-electric high-lift truck will operate for roughly 4 h at a time with no problems. Charging a completely empty battery takes around 6 h.

The HSE1000/3 is splash-proof, but is not suitable for long-term use in damp and cool areas.

The mechanical parking brakes on the swivel castors keep it safely and firmly in place when lifting and lowering goods. A foot guard on the swivel castors provides additional safety for users.

The easy-running, manoeuvrable PU castors and high-quality ball bearings are part of the standard configuration of the SolidHub HSE1000/3. These PU castors are highly abrasion-resistant and have a very good grip, but also roll extremely smoothly and quietly over uneven surfaces – a perfect middle ground between quietness and rolling resistance. Please take note of the loading capacity or properties of your floor before using the HSE1000/3. The HSE1000/3 is designed to be used on smooth, level floors.

The SolidHub semi-electric pedestrian stacker is equipped for almost any everyday situation in the warehouse setting, and can even occasionally be used as a work table, for example to keep individual parts available at an ergonomic hand height in production or in the workshop.

Spare parts can be delivered at any time through our 48 h spare parts service. Please contact us through the usual contact channels here in the shop.

Please use our technical data sheet to check that your pallets are compatible with the HSE1000/3.
The HSE1000/3 stacker is designed for use with open decked pallets.

 

Good to know: Warehouse staff do not need special training or a forklift licence for this. An introduction to operating the lifting device is sufficient. When working with the SolidHub HSE1000/3 electric pallet truck, it is of course important to observe and comply with legal requirements.

Please inform yourself about the nationally relevant regulations in the country of use before you operate the device. The user is responsible for initial operation and for selecting the appropriate personnel for this purpose.

......read more
Notes

Delivery note

This item will be delivered by articulated lorry (40 t) with side/rear unloading. For this, a suitable lifting device (e.g., forklift) must be provided by the customer. Additional services, such as delivery via tail lift, truck-mounted forklift, or low-loader, are available at an extra charge.

 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
(ᴓ 4.69 / 5.00)
Our independent rating partner "Trusted Shops" has established various measures to ensure that the ratings shown here only come from consumers who have actually purchased the products. A detailed description of the measures can be read at Trusted Shops.
Relevant ratings
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
06.04.2023 based on Art. No. 123035
Is a B-Ware device and we have not found any scratches
Read original
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
31.03.2023 based on Art. No. 108990
Very small diameter front wheels block at the slightest gravel
Read original
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
06.10.2022 based on Art. No. 108990
Good value for money!
Read original
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
29.06.2022 based on Art. No. 123035
A little heavy to handle for the move
Read original
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 
29.06.2022 based on Art. No. 108990
Duideli specification
Read original
Frequently asked questions
Questions about the product
Does SolidHub offer devices with initial stroke or free stroke?

At this time, SolidHub does not offer equipment with initial lift - a feature that raises the truck's wheel arms to provide additional ground clearance during load pickup and transport. However, we do have models in our line that have free lift. This feature allows the forks or load to be lifted without changing the overall height of the lift mast. An example of this is our HEF16/5 product.

General questions
How is the shipping process and how long is the delivery time for my order?

Your order is usually and depending on stock immediately after receipt of order or payment (depending on the selected payment method) within 24h handed over to the shipping company. The delivery time from this point nationwide is max. 72h (international shipping correspondingly longer). If you have selected an advice, the shipping company will contact you at least one day before delivery to coordinate the delivery date.

You can find more details about the shipping process here.