7,6 m pallet rack PR9000F galvanised / 110 cm deep / 2,5 m high / 2 levels for 24 euro pallets
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Number of levels2
Max. Load per field9.000 kg
Max. Load per level3.000 kg
Max. Load per pallet1.000 kg
- Assembly instructions pallet rack PR9000
- Technical datasheet pallet rack shelf PR9000 (German)
- Technical drawing PR9000 upright profile & beam (German)
- 4 x upright PR9000F 2,5 m high / 110 cm deep incl. strutting, unit load capacity: 9.000 kg
- 4 x beam PR9000F 180 cm wide incl. safety pins, compartment load capacity: 2000 kg
- 8 x beam PR9000F 270 cm wide incl. safety pins, compartment load capacity: 3000 kg
- Assembly material
- Load capacity labels in accordance with German DGUV 108-007 specification (formerly BGR 234)
- Assembly instructions
- 5 years warranty
- Holds heavy loads of up to 9.000 kg per unit without problems
- Complete pallet rack comes in a high-quality finish
- Large storage area thanks to the 2 levels and 3 units
- Galvanised surface for storage in outdoor areas
The TOPREGAL pallet racks PR9000F not only offer an extra-high load capacity but also feature a modular and flexible design. This complete solution is tested at a max. load of 3.000 kg per beam level in accordance with DIN EN 15512. It therefore has a max. unit load capacity of 9.000 kg and can be loaded with 1.000 kg per pallet.
The beams are hot-dip galvanised and therefore ideally suited for outdoor use. They are simply attached to the rack uprights thanks to the plug-in design. Additional safety pins ensure safety by preventing the beam from being accidentally lifted out. The pallet rack uprights consist of two hot-dip galvanised upright profiles. The front and rear upright profiles are screwed together with cross struts and diagonal struts for extra stability. For additional security, 2 foot plates per rack upright are mounted at the bottom ends and secured to the floor using bolt anchors. This means our modular pallet racking can be customised while also being highly secure as it is fixed to the floor.
The surface of this rack is galvanised and therefore weatherproof. This makes it particularly suitable for use outdoors, in cold stores, in corrosive environments or similar.
Modular design for customisation
The flexibility of the racking is an extremely interesting feature. The beams can be attached at any height in increments of 50 mm to create different sizes of shelf compartment. Our configurator also allows you to combine different compartment widths and racking heights to meet individual needs. Attachments in the form of additional shelf compartments measuring 180 cm, 270 cm and 360 cm wide or a worktable can be added later. It is also possible to attach additional levels at individual heights.
It’s no secret that TOPREGAL is impressed by his pallet racking. For every rack we sell, we offer a five-year guarantee.
For our pallet racks, we also offer shelf supports made of wood, wire mesh, mesh and steel for an optimal storage solution that meets your needs.
Quick and easy assembly
All assembly material such as nuts, screws, bolt anchors, foot plates and all small parts required for assembly are included in the price and delivery. If you have any problems with the design or testing of your new pallet racking, we also offer professional rack assembly and inspection in accordance with DIN EN 15635.
Safety & protection equipment and useful accessories for this type of rack, such as collision protection, galvanised mesh shelves or push-through protection, can be found in our webshop.
Discover the versatile pallet racking from TOPREGAL.
Important information about our racks
All data refer to evenly distributed loads. When loading your shelves, the load capacity for the compartment and the unit must not be exceeded. In principle, the current guidelines on health and safety at work (DGUV 108-007 / BGR 234) apply when using our shelves. TOPREGAL does not accept any liability for accidents/damage caused by improper use. Our expert team of consultants will be happy to answer any questions you may have. Dimensions given are approximate and may vary by a few centimetres. Please contact us if you need the exact dimensions for your desired shelf.
Of course we also offer shelves in individually adapted dimensions.
Please send us an inquiry by e-mail to email@example.com, by fax or call our customer hotline +49 (0) 7158 91 81 500.
You can find our contact form here.
The maximum weight that a rack can carry in total is called the bay load. However, the weight of the rack itself is not included (the storage rack has a bay load of 2000 kg).
The maximum weight on the individual shelf compartment / shelf is called shelf load (the storage shelving unit has a shelf load of max. 500 kg).
The sum of the shelf loads, however, must not exceed the field load. A prerequisite (for the weight specifications) is always the even distribution of the loads.
The pictures show field load and shelf load using the example of a storage rack.
Fixing our racks to the wall is not permitted.
Pallet racks must be anchored to the floor in accordance with DGUV 108-007, DIN EN 15512 & DIN EN 15635.
Storage racks must be fixed to the floor from a depth/height ratio greater than 5:1. Below this no anchoring is required.
Our spacers are used exclusively for the parallel positioning of our shelves.
Our 3 pallet rack models PR4500, PR9000 & PR15000 differ mainly in the load capacity for light, medium & heavy loads. Here the material thickness and dimensions of e.g. the upright profile, cross beams and foot plates differ. The construction of the three models is identical and our accessories are compatible with each other.
The model designation refers to the maximum field load of the individual systems:
- Pallet rack PR4500 - Bay load (max.): 4500 kg / Shelf load (max.): 1500 kg
- Pallet rack PR9000 - Bay load (max.): 9000 kg / Shelf load (max.): 3000 kg
- Pallet rack PR15000 - Bay load (max.): 15000 kg / Shelf load (max.): 4500 kg
This corresponds to a maximum load per pallet of 500 / 1000 / 1500 kg.
The individual levels can be hung or attached individually as desired in a grid spacing of 5 cm.
Depending on the country of delivery, we offer different payment methods, which you can choose from during the ordering process.
- Prepayment less 4 % discount
- Credit card
- Invoice - Germany only
- Cash on collection
- Leasing request - Germany only
- Klarna (instant bank transfer) - in all EU countries offered by Klarna
- iDeal - only in Belgium, Netherlands, Luxembourg
A detailed list with further information on the processing of each payment method can be found here.
The goods are usually delivered on a truck with side unloading. In this case, the shipment must be unloaded from the vehicle with the help of a forklift or a lifting device with sufficient lifting height. Alternatively, the goods can also be picked up manually from the vehicle.
You can find detailed information about the shipping process here.
We supply all complete offers as well as individual parts including all material required for assembly.
No additional mounting materials are required.
The order status can be inquired by phone on our customer hotline +49 (0)7158 9181 550. You can also inquire about the current status of your order by e-mail to firstname.lastname@example.org or fax.
Your order is usually and depending on stock immediately after receipt of order or payment (depending on the selected payment method) within 24h handed over to the shipping company. The delivery time from this point nationwide is max. 72h (international shipping correspondingly longer). If you have selected an advice, the shipping company will contact you at least one day before delivery to coordinate the delivery date.