24,3 m pallet rack PR9000F galvanised / 110 cm deep / 6,5 m high / 3 levels / rack layer Galvanised mesh
- Holds heavy loads of up to 9.000 kg per unit without problems
- Complete pallet rack comes in a high-quality finish
- Large storage area thanks to the 3 levels and 9 units
- Galvanised surface for storage in outdoor areas
- Shelf made of Galvanised mesh for storage without pallet
- Holds heavy loads of up to 9.000 kg per unit without problems
- Complete pallet rack comes in a high-quality finish
- Large storage area thanks to the 3 levels and 9 units
- Galvanised surface for storage in outdoor areas
- Shelf made of Galvanised mesh for storage without pallet
-
ModelPR9000F
-
Max. load1.000 kg
-
Number of levels3
-
Rack layerGalvanised mesh
-
SurfaceHot-dip galvanised
-
Width24.300 mm
-
Depth1.100 mm
-
Height6.500 mm
-
Max. Load per field9.000 kg
-
Max. Load per level3.000 kg
-
Max. Load per pallet1.000 kg
-
Max. Load per module800 kg
- 10 x upright PR9000F 6,5 m high / 110 cm deep incl. strutting, unit load capacity: 9.000 kg
- 6 x beam PR9000F 180 cm wide incl. safety pins, compartment load capacity: 2000 kg
- 48 x beam PR9000F 270 cm wide incl. safety pins, compartment load capacity: 3000 kg
- 3 x galvanised mesh PR9000F 180 cm wide / 110 cm deep (comprising 2 modules)
- 24 x galvanised mesh PR9000F 270 cm wide / 110 cm deep (comprising 3 modules)
- Assembly material
- Load capacity labels in accordance with German DGUV 108-007 specification (formerly BGR 234)
- Assembly instructions
- 5 Years warranty
- Holds heavy loads of up to 9.000 kg per unit without problems
- Complete pallet rack comes in a high-quality finish
- Large storage area thanks to the 3 levels and 9 units
- Galvanised surface for storage in outdoor areas
- Shelf made of Galvanised mesh for storage without pallet
The TOPREGAL pallet racks PR9000F not only offer an extra-high load capacity but also feature a modular and flexible design. This complete solution is tested at a max. load of 3.000 kg per beam level in accordance with DIN EN 15512. It therefore has a max. unit load capacity of 9.000 kg and can be loaded with 1.000 kg per pallet.
The beams are hot-dip galvanised and therefore ideally suited for outdoor use. They are simply attached to the rack uprights thanks to the plug-in design. Additional safety pins ensure safety by preventing the beam from being accidentally lifted out. The pallet rack uprights consist of two hot-dip galvanised upright profiles. The front and rear upright profiles are screwed together with cross struts and diagonal struts for extra stability. For additional security, 2 foot plates per rack upright are mounted at the bottom ends and secured to the floor using bolt anchors. This means our modular pallet racking can be customised while also being highly secure as it is fixed to the floor.
The surface of this rack is galvanised and therefore weatherproof. This makes it particularly suitable for use outdoors, in cold stores, in corrosive environments or similar.
Modular design for customisation
The flexibility of the racking is an extremely interesting feature. The beams can be attached at any height in increments of 50 mm to create different sizes of shelf compartment. Our configurator also allows you to combine different compartment widths and racking heights to meet individual needs. Attachments in the form of additional shelf compartments measuring 180 cm, 270 cm and 360 cm wide or a worktable can be added later. It is also possible to attach additional levels at individual heights.
It’s no secret that TOPREGAL is impressed by his pallet racking. For every rack we sell, we offer a five-year guarantee.
The optimal rack layer
The TOPREGAL mesh shelf supports offer increased protection against liquids and corrosion. This makes them ideal for use outdoors or in areas subject to high air humidity. Galvanised mesh also has clear advantages in areas where abrasive or corrosive substances are used. For this reason, they are compliant with normal fire protection requirements. Galvanised mesh also provides a better overview of the stored goods, as they can be viewed in the rack from below. Each galvanised mesh module has a maximum load capacity of 800 kg with an even load distribution and a mesh size of 9.9 x 9.9 cm. When loading your pallet rack, please observe the maximum shelf and unit loads specified.
Quick and easy assembly
All assembly material such as nuts, screws, bolt anchors, foot plates and all small parts required for assembly are included in the price and delivery. If you have any problems with the design or testing of your new pallet racking, we also offer professional rack assembly and inspection in accordance with DIN EN 15635.
Safety & protection equipment and useful accessories for this type of rack, such as collision protection, galvanised mesh shelves or push-through protection, can be found in our webshop.
Discover the versatile pallet racking from TOPREGAL.
Important information
All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (DGUV Rule 108-007 / BGR 234) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.
Our 3 pallet rack models PR4500, PR9000 & PR15000 differ mainly in the load capacity for light, medium & heavy loads. Here the material thickness and dimensions of e.g. the upright profile, cross beams and foot plates differ. The construction of the three models is identical and our accessories are compatible with each other.
The model designation refers to the maximum field load of the individual systems:
- Pallet rack PR4500 - Bay load (max.): 4500 kg / Shelf load (max.): 1500 kg
- Pallet rack PR9000 - Bay load (max.): 9000 kg / Shelf load (max.): 3000 kg
- Pallet rack PR15000 - Bay load (max.): 15000 kg / Shelf load (max.): 4500 kg
This corresponds to a maximum load per pallet of 500 / 1000 / 1500 kg.
Of course we also offer shelves in individually adapted dimensions.
Please send us an inquiry by e-mail to info@topregal.com, by fax or call our customer hotline +49 7158 91 81 500.
You can find our contact form here.
Fixing our racks to the wall is not permitted.
Pallet racks must be anchored to the floor in accordance with DGUV 108-007, DIN EN 15512 & DIN EN 15635.
Storage racks must be fixed to the floor from a depth/height ratio greater than 5:1. Below this no anchoring is required.
Our spacers are used exclusively for the parallel positioning of our shelves.
The bay load (C) is the total load-bearing capacity of a shelf bay / the load between two shelf uprights. Your own weight does not count here.
The maximum weight that rests on the individual shelf / rack is called the shelf load (B). The sum of the shelf loads must not exceed the bay load.
Point load (A) are the forces acting on the floor in a point-like manner, also known as individual load.
The individual levels can be hung or attached individually as desired in a grid spacing of 5 cm.
Depending on the country of delivery, we offer different payment methods, which you can choose from during the ordering process.
For more information on how to process each payment method, please see our detailed page.
Your order will usually be handed over to the shipping company within 24 hours ofreceipt of the order or payment (depending on the payment method selected), depending on stock levels. From this point on, the delivery time within the Federal Republic of Germany is a maximum of 72 hours (international shipments take correspondingly longer, please note the information directly on the respective item). If you have selected an advice note, the shipping company will contact you at least one day before delivery to arrange the delivery date.
The goods are usually delivered on a truck with side unloading. In this case, the shipment must be unloaded from the vehicle with the help of a forklift or a lifting device with sufficient lifting height. Alternatively, the goods can also be picked up manually from the vehicle.
You can find detailed information about the shipping process here.
We supply all complete offers as well as individual parts including all material required for assembly.
No additional mounting materials are required.
The order status can be inquired by phone on our customer hotline +49 (0)7158 9181 550. You can also inquire about the current status of your order by e-mail to info@topregal.com or fax.