+++Permanent low prices - Many articles massively & constantly reduced in price!+++


All products

2.3m mobile tyre rack 174–214cm shelf height / 60cm deep with 3 levels
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 

Discounts of up to 10% on the value of your cart!
3 %
5 %
10 %
Technical data & downloads
Article No. 86309
  • Width
    2.300 mm
  • Height
    2.140 mm
  • Depth
    600 mm
  • Number of levels
  • Beam length
    2.200 mm
  • Max. Load per level
    400 kg
  • Rack layer
  • Surface
  • Variant
    Tyre car
  • Mobile
Delivery volume
  • 2 mobile storage-rack uprights 174cm high with 40cm height-adjustable foot part / 60cm deep incl. castors and covers for rack uprights
  • 6 storage-rack individual beams 220cm, compartment load: 400kg
  • 2 transport handles – mobile storage rack / pallet rack (incl. assembly material)
  • All accessories such as foot plates, screws, nuts and all material required for assembly are included.
  • Assembly instructions
New, complete mobile tyre rack without any shelving for the handy transport of tyres, rims or similar.

The outer dimension is 230cm. The usable shelf area (inside dimension) is 220cm per level.

This shelf has 3 levels, each of which can be loaded with an average of 12 tyres or rims.

The max. compartment load is 400kg per compartment and the max. unit load (between 2 uprights) is 500kg per unit.

The beams (powder-coated in pure orange RAL 2004) are easily attached to the uprights and secured using safety pins to prevent them accidentally being lifted out. The beams can be attached at individual heights in increments of 50mm. The tyres are placed onto the beams and can be stored safely, protecting them from damage thanks to the special design of the stepped beam.

Mobile tyre-rack uprights (powder-coated in signal blue RAL 5005) consist of a front and rear upright profile, which are screwed together using the screwed-in cross and diagonal struts, as well as 2 castors with locking brakes. The rack uprights are closed at the top with two specially manufactured panels to increase work safety and to provide a flush finish to the edges. The panel is simply put on and is thus easy to position.

The work height of the mobile tyre rack is individually adjustable in increments of 5cm and ranges from 174cm to 214cm. Just adjust the insertion height of the upright at the foot part.

The complete rack is equipped with 4 castors with locking brakes and is therefore suitable for mobile use. This mobile rack is offered especially for commercial and industrial use and is also suitable for robust applications.

This flexible type of rack can be expanded and adapted to your requirements at any time:

All material such as foot plates, screws, nuts and all small parts required for assembly are included in the price and delivery.

Other compatible products and accessories for this rack can also be found in our individual parts category.
Frequently asked questions
General questions

Your order is usually and depending on stock immediately after receipt of order or payment (depending on the selected payment method) within 24h handed over to the shipping company. The delivery time from this point nationwide is max. 72h (international shipping correspondingly longer). If you have selected an advice, the shipping company will contact you at least one day before delivery to coordinate the delivery date.

You can find more details about the shipping process here.

Suitable products
trusted shops
Our Reviews from topregal.co.uk
5 /5.00