Storage tent, 8 x 12 x 4.46 m, PVC 650 g/m², waterproof grey, tent hall Z-ST812
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Room area96 m²
Make storage possible, no matter where
You can do this with our new storage tent Z-ST812, which transforms an open space of 96 m² (8 m x 12 m) into a usable area. No matter if you want to store or temporarily store goods, if you need a shelter for a larger group of people or if you want to create working space quickly and flexibly, with our tent hall you can turn your business into reality. The tear-resistant PVC tarpaulin of our large tent can easily be laid over the stable galvanized iron tubes of the tent frame. Due to the innovative assembly technique, this professional tent is quickly ready for use and creates space for storage. The 4 m wide x 3.5 m high roll-up tarpaulin door at the front of the industrial tent offers enough space to use the tent as an interim garage for several vehicles and trucks or to easily drive in with lifting equipment.
The 4.4 m high saddle roof of the storage tent can withstand most weather conditions and ensures that rain is diverted to the sides. This keeps the stored goods dry and prevents them from being damaged by moisture.
Stability and safety with the Z-ST812
The particularly strong construction profile, with its 18 legs, ensures stability and stability. Four fixed tension rods, which are built into the door frame parts, create additional stability at the base of the storage tent. The fixed roof tarpaulin, as well as both side tarpaulins, with the roller doors are made of fire-retardant PVC tarpaulin, with 650 G/m². This extra thick tarpaulin withstands even the worst conditions and is both scratch and tear resistant and holds a roof load of 80 kg/m². It is nevertheless recommended that the tarpaulin be cleared as soon as possible in the event of snowfall. The nylon ropes used to attach the awning to the poles withstand heavy loads and are easy to fasten. This means that you can be sure that the tent will also withstand higher temperatures. The roof and the long sides are made of one piece and offer reliable protection from wind and weather with the extra long ground skirt. This means that the tent will remain standing even at wind speeds of up to 16 m/s (wind force 7).
This rests on the ground and prevents side winds or splashing water from downpours from entering the interior of the tent from the side. The ingenious tensioning system is not accessible from the outside. This means that no outriggers, such as ropes, are necessary for tensioning, which would require additional space around the tent. Readjustment is possible at any time with the easy-to-use ratchets. This ensures a taut tarpaulin and a wind-proof standing of the tent. This is especially important when it rains or there is a strong wind.
This allows our Z-ST812 tent hall to be erected in a stable and stable manner, even in bad weather.
The long and stable expansion bolts allow the tent to be fixed well to solid surfaces. It is best to mount the tent hall on a metal surface or concrete floor. This will ensure that the Z-ST812 is firmly anchored and weatherproof.
Thus, the Z-ST812 storage tent complements all immobile production and storage facilities, with flexible mobile usable space.
The Z-ST812 storage tent is only intended for erection with anchoring. Setting up without anchoring to the ground may cause instability.
In Germany, tents with a floor area of 75m² or more and/or when erected on certain sites require a permit. This regulation may also apply to other countries. Tent owners are solely responsible for ensuring that permits are obtained and local regulations are followed. An EN13782 tent logbook has not been created for this tent. You may have to order this yourself.
- 1 storage tent Z-ST812 with the dimensions 8 x 12 x 4.46 m