5.8m MFR1000 multipurpose rack, 200cm high, 60cm deep

 ★ ★ ★ ★ ★ 

 ★ ★ ★ ★ ★ 

This offer is a multifunctional shelf from the company Topregal. Discover our product novelty and the advantages of the MFR1000! This sample article illustrates the possibilities of our multifunctional workbenches and shelves. All listed single parts within this category can be combined freely and flexibly, so that you can assemble the optimal product for your purpose. You can adapt and expand the product at any time - even retrospectively - based on your individual requirements.

This article has the following components/modules:

Basic article (required for all possible variants, dimensions flexible).

• Packing table stand 200cm high, 60cm deep with a field load of 2000kg Colour: RAL 5005 signal blue
• Trusses 110cm wide with a shelf load of 500kg incl. safety pins Colour: RAL 2004 Pure orange
• Trusses 220cm wide with a shelf load of 500kg incl. safety pins Colour: RAL 2004 Pure orange
  

Modular items (included in this offer)

• Multiplex board 110cm wide, 60cm deep beech wood 25mm thick sealed with linseed oil varnish, shelf load of 500kgApplication
  : Worktop for the upper level of the packing table.
  
• Wooden shelf 110cm wide, 60cm deep made of 25mm thick chipboard with a shelf load of 500kgApplication
  : Shelf in the lower level of the rack for storing e.g. packing material, cartons or work equipment
  
• Steel shelf 110cm wide, 60cm deep with a shelf load of 500kgApplication
  : Storage level in the lower area of the shelf for stowing e.g. packaging material, cartons or work equipment.
  
• Mesh shelf 110cm wide, 60cm deep with a shelf load of 500kgApplication
  : Storage level in the lower area of the shelf for stowing e.g. packaging material, cartons or work equipment.
  
• Inclined shelf 110cm wide, 60cm deep made of 25mm thick chipboard with a shelf load of 300kgApplication
  : inclined shelf level, ideal for use with open fronted storage bins
  .
• Inclined shelf 220cm wide, 60cm deep made of 25mm thick chipboard with a shelf load of 300kgApplication
  : inclined shelf level optimal for use with open fronted storage b
  ins
• Round cross bar 110cm incl. safety pins Colour: RAL 2004 pure orangeApplication
  : Fall-through protection when using sloping shelves as well as roll-off aid for bubble wrap
  
• Round cross bar 220cm incl. safety pins Colour: RAL 2004 pure orangeApplication
  : Fall-through protection when using sloping shelves
  
• Foldable open fronted storage bins 50cm deep, 27,5cm high, 30,3cm wide, weight capacity up to 28kgApplication
  : for storage of small parts like e.g. screws, nuts & small parts of all kind
  
• Roll holder/center bar galvanized 110cm wide incl. fixing set 60cm deepApplication
  : serves as unwinding bar for lust cushion foil
  
• Tool cabinet WS4 with 4 drawers, 60cm deepApplication
  : for storage and safe keeping of tools and working materials
  
• Tool cabinet WST with door and 1 shelf, 60cm deepApplication
  : for storage and safe keeping of tools and working materials
  
• Perforated rear wall 110cm wide, 50cm high Colour: RAL 5005 signal blueApplication
  : serves to fasten tool holders, open fronted storage bins or as visual or drop protection
  
• Tool holder set 11 piecesApplication
  : for optimal storage of tools and work equipment for immediate use at the workplace
  .

This shelf is specially designed for commercial and industrial use and is particularly suitable for robust use. We offer a warranty of 5 years for this article. The construction of the MFR1000 multifunctional shelving is in line with industry standards. The load capacity per level is 500kg, for the sloping shelf a load capacity of 300kg per level applies. The load capacity of the entire rack is 2000kg. These data are valid for evenly distributed load. The outer dimension of the shelf is 580cm. The usable supporting surface (inner dimension) is 110cm or 220cm per level. The table levels (traverses) are individually adjustable in height in a grid of 50mm. By the possibility of the individual arrangement of the levels you can adapt this shelf at any time after your conceptions and lock in the ideal working height. Due to our plug-in system, it is possible to assemble or disassemble the multifunctional shelf MFR1000 easily and quickly at any time. All individual parts used in this article come from our warehouse shelving range and are therefore compatible with all other shelving types from this category.