WH50 hydraulic jack for heavy goods vehicles, TecMaschin, 50.000 kg
★ ★ ★ ★ ★
★ ★ ★ ★ ★
(6)
- High traction weight of up to 50.000 kg, with which even lorries can be lifted
- Compact dimensions of 285 mm x 540 mm x 1.200 mm for easy transport
- High manoeuvrability of the 55 kg heavy duty jack, thanks to the castors
- Intuitive operation thanks to the clear and simple design of the lifting device
- Fast working, thanks to the lifting speed of 11 mm/s
- High traction weight of up to 50.000 kg, with which even lorries can be lifted
- Compact dimensions of 285 mm x 540 mm x 1.200 mm for easy transport
- High manoeuvrability of the 55 kg heavy duty jack, thanks to the castors
- Intuitive operation thanks to the clear and simple design of the lifting device
- Fast working, thanks to the lifting speed of 11 mm/s
-
ModelWH50
-
Max. Load50.000 kg
-
Max. Lifting height420 mm
-
Weight55 kg
-
ColourBlue
-
SurfacePainted
-
Width285 mm
-
Depth540 mm
-
Height1.200 mm
-
Outer diameter9 mm
-
TyresSolid rubber
- 1 x hydraulic jack for truck WH50, TecMaschin, 50.000 kg
- 12 Months warranty
- High traction weight of up to 50.000 kg, with which even lorries can be lifted
- Compact dimensions of 285 mm x 540 mm x 1.200 mm for easy transport
- High manoeuvrability of the 55 kg heavy duty jack, thanks to the castors
- Intuitive operation thanks to the clear and simple design of the lifting device
- Fast working, thanks to the lifting speed of 11 mm/s
Powerful lifting
The WH50 hydraulic jack from TecMaschin effortlessly lifts vehicles such as passenger cars, vans and even heavy goods vehicles with a traction weight of up to 50.000 kg. The compact device (285 mm x 540 mm x 1.200 mm) is very easy to operate. Its light weight of 55 kg and the fold-down drawbar make it convenient to transport and allow it to be positioned flexibly directly underneath the pick-up point of different vehicles. This is assisted by the 180 mm transport wheels, which can easily overcome small obstacles such as edges and kerbstones. Right next to the ergonomically positioned control lever is the 9 mm wide air compressor connector. This has a minimum performance rating of 8 bar. When the compressor is connected and switched on, the control lever can be used to raise the lifting cylinder up to 420 mm in just 11 mm/s. The two shims can be placed on the jack cylinder if needed. Once work on the vehicle underbody has been completed, the hydraulic jack can be lowered again within 17 mm/s.
Your order will usually be handed over to the shipping company within 24 hours ofreceipt of the order or payment (depending on the payment method selected), depending on stock levels. From this point on, the delivery time within the Federal Republic of Germany is a maximum of 72 hours (international shipments take correspondingly longer, please note the information directly on the respective item). If you have selected an advice note, the shipping company will contact you at least one day before delivery to arrange the delivery date.
