Electric barrel pump FP60, 880 W, 1 l/s, TecMaschin

 ★ ★ ★ ★ ★ 

 ★ ★ ★ ★ ★ 

(30)

Empty containers in seconds 

The FP60 electric barrel pump makes it possible. With its motor output of 880 W, it produces suction with an effective pumping capacity of 1 l/s. This is achieved in part by the high synchronous speed of between 5.000 - 10.000 rpm and allows the powerful oil pump to empty containers such as canisters, barrels and tanks at a fast rate. This makes it possible to transfer water, hydraulic/engine oil or diesel into another container without the need to carry out tiresome manual pumping or to tilt the container to empty it. It also makes sure that not a drop of oil or diesel escapes into the environment. The diesel FP60 pump is therefore environmentally friendly too. The pump speed can be adjusted using a regulator on the back of the unit. With a mains frequency of 50 Hz and an electrical voltage of 220 V, the pump meets standards and can therefore be plugged into to any standard socket.

Ergonomically agile operation

Not only do the electric oil pump’s compact dimensions (100 mm x 1.150 mm x 250 mm) make it easy to transport; in combination with its light weight of 2,79 kg and the ergonomic shape of the handle, they also make it easy to handle the practical barrel pump. This is helped by the 920 mm long aluminium suction tube (diameter 43 mm), which places the centre of gravity comfortably near the handle. This makes it easy to lift the unit and guide it into a container. For additional convenience, the handle-mounted lock button eliminates the need to hold the pump trigger continuously. The included steel-wire-reinforced PVC hose is very flexible and can easily be attached to the hose connector with its diameter of 34 mm. With the 2.000 mm long hose, you can decide where to direct the pumped liquid. The 150 cm long cable allows you to work flexibly at different locations on your premises.

This makes the FP60 barrel pump the best choice for emptying containers quickly and practically.