Machine guard 3x6 configuration with open side and swing door
★ ★ ★ ★ ★
★ ★ ★ ★ ★
on the value of your cart!
Material thickness3 mm
Max. Energy impact1.600
- The machine guard fencing system reliably separates large production machines from walkways and vehicle paths.
- With a high load capacity of 1.600 J, the guard can withstand high impacts and shocks, providing a high level of workplace safety
- The system is lightweight, practical and modular, making it flexible and easy to set up
- The 2.000 mm tall system can be used to safely fence off entire production lines as well as stand-alone machines
Simple, secure, modular
The machine guard fencing system from TOPREGAL. Its modular design makes it simple and straightforward to separate off different areas of a production hall, mainly to protect workers from machines such as bending machines, saws or even robotic arms. It allows autonomous devices to be easily separated from walkways and vehicle paths to enable the machine to work without interference, but also to ensure safety in the workplace. There are many possible use cases for the system. For example, it can be used to restrict access to machine sides or separate off whole production lines to guarantee unobstructed production.
The 2.000 mm tall system stops machines from working outside their own range of motion and prevents workers from reaching into machines and risking injury. The yellow/black signal colour has been deliberately chosen to guarantee maximum safety. The close mesh (aperture size 20 x 100 mm) prevents hands from getting in accidentally. The corner and side posts on the guard fencing are each secured to the floor with 2 bolt anchors. The 3 mm thick fencing struts are designed to be robust and therefore have a long service life.
Pre-configured as a rectangle
The machine guard system from TOPREGAL allows flexible and individual configuration to cover different applications. The large 3x6 configuration with open side and swing door creates a separate area where several workstations can be easily separated from pathways and also one or more machines can be safely enclosed. The open side can be placed directly against walls or used as the start of a longer production line. The simple swing door allows access to machines for maintenance, inspection or repairs. When planning, it is important to consider the additional space required by the swing door in order to open it. Our TOPREGAL Experts will be happy to advise you on this.
Swing open, enter
The swinging door with its smooth-running hinge is probably the easiest solution to ensure access to a machine. It can be opened to carry out maintenance work on equipment, to assess the standstill of a machine or to insert further raw material. The 1000 x 2000 mm door can be embedded at any point in the system of machine guard walls. This also allows you to create access to your machine at multiple points.
- 1 x Machine guard 3x6 configuration with open side and swing door
- 12 months warranty