Snow shovel for forklift, width 1.500 mm, SolidHub
- Use the snow shovel to turn your forklift into a clearing machine
- Quickly clears large areas thanks to the working width of 1.500 mm
- A 5-setting adjustable angle allows it to be used flexibly under a variety of conditions
- The robust rubber lift on the bottom edge of the snow blade can be replaced and allows residue-free clearing
- Use the snow shovel to turn your forklift into a clearing machine
- Quickly clears large areas thanks to the working width of 1.500 mm
- A 5-setting adjustable angle allows it to be used flexibly under a variety of conditions
- The robust rubber lift on the bottom edge of the snow blade can be replaced and allows residue-free clearing
- Use the snow shovel to turn your forklift into a clearing machine
- Quickly clears large areas thanks to the working width of 1.500 mm
- A 5-setting adjustable angle allows it to be used flexibly under a variety of conditions
- The robust rubber lift on the bottom edge of the snow blade can be replaced and allows residue-free clearing
Quickly mounted, quickly cleared
This is no problem with the robust snow plough for forklift trucks from Steel. With a low weight of 70 kg and compact dimensions (1.500 mm x 1.070 mm x 480 mm), the snow blade is quickly mounted on a forklift truck. Thanks to the working width of 1.500 mm and the snow plough's 5-angle adjustable suspension, you can clear driveways, courtyards and larger open spaces in no time at all. The flexible rubber strip on the underside of the snow plough seals the area right down to the ground, ensuring residue-free clearing.
With the practical support, the snow blade for the forklift can be aligned so that the 112 x 52 mm large forklift pockets are horizontal. This means you can simply drive into them, tighten the locking screws and lift the snow plough. As the pockets are only 300 mm apart, the forklift forks need to be adjusted for this. The forklift truck should also be able to push a traction weight of 2 tonnes.
As soon as the slider is firmly mounted and the angle is set, you can start clearing the area. Turn your forklift truck into a snow clearing vehicle with the practical snow pusher from SolidHub.
Note:
Please note that the use of the attachment shifts the centre of gravity of your forklift truck. For more detailed information, refer to the heavy load diagram and the centre of gravity of your forklift truck.
The attachment is not suitable for pallet trucks, but for forklift trucks. Before purchasing, please check whether the attachment is compatible with your forklift truck (fork tine cross-section up to max. 112 mm x 52 mm).
Please inform yourself about the nationally relevant regulations in the country of use before you operate the device. The user is responsible for initial operation and for selecting the appropriate personnel for this purpose.
The snow blade for the forklift truck has 112 × 52 mm forklift pockets. The pockets are 300 mm apart, so the forks on the forklift truck must be adjustable to these dimensions. Make sure they are aligned horizontally - the practical support on the snow pusher helps here. Simply drive in, tighten the locking screws and lift the snow plow. The forklift truck should have a traction weight of 2 tons.
Dimensional drawing of fork pockets
Your order will usually be handed over to the shipping company within 24 hours ofreceipt of the order or payment (depending on the payment method selected), depending on stock levels. From this point on, the delivery time within the Federal Republic of Germany is a maximum of 72 hours (international shipments take correspondingly longer, please note the information directly on the respective item). If you have selected an advice note, the shipping company will contact you at least one day before delivery to arrange the delivery date.
