All products

EBM540 post-hole digger incl. earth auger for tractor, diameter 300 mm, depth 600 mm
 ★ ★ ★ ★ ★ 
 ★ ★ ★ ★ ★ 

Discounts of up to 10% on the value of your cart!
9.000
3 %
22.500
5 %
45.000
10 %
Technical data & downloads
Article No. 169741
  • Model
    EBM540
  • Weight
    89 kg
  • Colour
    Blue
  • Surface
    Painted
  • Depth
    600 mm
  • Outer diameter
    300 mm
  • Speed
    540 rpm
Delivery volume
  • 1 post-hole digger, cat. 1 hitch, EBM540
  • 1 PTO shaft
  • 1 earth auger, diameter 300 mm, depth 600 mm
  • 12 Months warranty
  • The handy EBM540 post-hole digger can be mounted to tractors with a category 1 three-point hitch
  • Its light weight makes it easy to mount the hydraulic device
  • The accompanying PTO shaft is included
  • A slip clutch protects the engine and gearbox from damage if the auger gets stuck

Sinking piles without any problems

Our EBM540 post-hole digger makes it possible. With a rotation speed of 540 rpm, the PTO shaft enables the auger to dig through even the hardest and driest soil. The earth auger consists of two clockwise-rotating augers equipped with interchangeable, hardened cutting edges at the tip. To allow it to drill smoothly into the ground, this auger is also equipped with a replaceable tip. 

The light weight of 89 kg and the compact dimensions of 750 x 1800 x 660 mm for the entire superstructure allow it to be mounted easily to a category 1 three-point hitch. The 1290 mm PTO shaft hangs below the linkage. The post-hole digger is equipped with a slip clutch and a shear bolt. These protective devices prevent damage to the engine or gearbox if the auger gets stuck in ground that is too firm.

The tractor to which the post-hole digger, including the PTO shaft and earth drill, is attached should have a transmission power of between 25 and 50 HP.

The right drill for the post-hole digger

The large but effective EB220 auger can drill holes in soft to hard ground. The drill diameter is 300 mm with a maximum drilling depth of 600 mm. This is made possible by the 1200 mm length of the entire auger of and the hardened, interchangeable drill bits. Both the tip and the cutting edges, which are attached directly to the top of the auger, are made of hardened steel, making them ideal even for penetrating harder ground. The auger’s light weight of 21 kg makes it pleasant to handle and comfortable to install on the post-hole digger.

The right tool makes the difference. Choose the EBM540 post-hole digger incl. EB220 earth auger now.

Please inform yourself about the nationally relevant regulations in the country of use before you operate the device. The user is responsible for initial operation and for selecting the appropriate personnel for this purpose.

......read more
Frequently asked questions
General questions
How is the shipping process and how long is the delivery time for my order?

Your order is usually and depending on stock immediately after receipt of order or payment (depending on the selected payment method) within 24h handed over to the shipping company. The delivery time from this point nationwide is max. 72h (international shipping correspondingly longer). If you have selected an advice, the shipping company will contact you at least one day before delivery to coordinate the delivery date.

You can find more details about the shipping process here.