10,7 m cantilever rack KR6000 / hot-dip galvanised / double-sided / 4 m high / 75 cm cantilever depth / 6 levels
★ ★ ★ ★ ★
★ ★ ★ ★ ★
(9)
- Efficient storage of goods such as wooden boards or tubes
- Extra-robust design
- Enormous load capacity with up to 3.000 kg per stand
- Cantilevers can be attached individually in increments of 100 mm
- Efficient storage of goods such as wooden boards or tubes
- Extra-robust design
- Enormous load capacity with up to 3.000 kg per stand
- Cantilevers can be attached individually in increments of 100 mm
-
ModelKR6000
-
Beam length1.500 mm
-
Max. Load per stand3.000 kg
-
Versiondouble-sided
-
Number of levels6
-
Rack layerwithout
-
Surfacehot-dip galvanised
-
Width10.700 mm
-
Depth750 mm
-
Height4.000 mm
-
Max. Load per field6.000 kg
-
Range of applicationoutdoor
-
Axle dimension1.500 mm
- Assembly & operating instructions: KR6000 (INT)
- Technical data sheet: KR6000 (INT)
- Technical drawing KR6000 upright (German)
- 8 x upright 4 m high for cantilevers up to 3.000 kg (type: KR6000)
- 6 x cantilever rack unit (strutting) for 4 m height, axial dimension 1.5 m (type: KR6000)
- 1 x cantilever rack unit (strutting) for 4 m height, axial dimension 1 m (type: KR6000)
- 96 x cantilever deep up to 1.000 kg (type: KR6000)
- All material required for assembly
- Load capacity labels in accordance with German DGUV 108-007 specification (formerly BGR 234)
- 5 years warranty
- Efficient storage of goods such as wooden boards or tubes
- Extra-robust design
- Enormous load capacity with up to 3.000 kg per stand
- Cantilevers can be attached individually in increments of 100 mm
The TOPREGAL cantilever racks KR6000 feature a particularly robust, modular and flexible design.
This cantilever rack in a double-sided design with a width of 10,7 m is 4 m high, with an overall depth of 75 cm, and features 6 cantilever levels, with a cantilever depth of 75 cm. The maximum load per cantilever is 1.000 kg. The cantilevers can be attached at individual heights in increments of 100 mm and are secured with safety bolts and pins. The foot parts can also be used as a storage level (depending on the goods). To protect the load from accidentally slipping, roll-off protection can be attached at the end of each cantilever. This is included as standard in the delivery volume. The maximum unit load capacity (even total load between two uprights) is 3.000 kg.
The upright load is maximum 3.000 kg. At specific widths, the rack ends with a unit with an axial dimension of 100 cm. Best of all, you can extend your rack in terms of width or number of levels at any time.
The surface of this rack is galvanised and therefore weatherproof. This makes it particularly suitable for use outdoors, in cold stores, in corrosive environments or similar.
This cantilever rack of the KR6000 type has no shelf support.
Important information
All data refer to evenly distributed loads. When loaded, the shelf load and field load must not be exceeded. In principle, the current guidelines on safety and health at work (DGUV Rule 108-007 / BGR 234) apply during use. TOPREGAL accepts no liability for accidents/damage caused by improper use. Our expert advisory team will be pleased to answer any questions you may have. Dimensions given are approximate and may deviate by a few centimetres. Contact us if you need the exact dimensions for your desired product.
Your order is usually and depending on stock immediately after receipt of order or payment (depending on the selected payment method) within 24h handed over to the shipping company. The delivery time from this point nationwide is max. 72h (international shipping correspondingly longer). If you have selected an advice, the shipping company will contact you at least one day before delivery to coordinate the delivery date.