This online shop uses cookies to provide you with an optimal shopping experience. For example, session information or language settings are stored on your computer. Without cookies, the functionality of the online shop is limited. If you do not agree, please click here. OK, got it

19.2m cantilever rack (type: KR3000 galvanised) 3.5m high double-sided with 5 levels 100cm deep incl. galvanised mesh shelves

Discounts of up to 10%
on the value of your cart!
Overview / specification
  • Width
    19,2m
  • Height
    350cm
  • Depth
    100cm
  • Number of layers
    5 levels
  • Max. load per layer
    500kg
  • Version
    double-sided
  • Rack layer
    Galvanised mesh
  • Surface
    Galvanised
Description
New, complete cantilever rack – double-sided design – 19.2m wide, 350cm high and 5 cantilever levels with a cantilever depth of 100cm. The maximum load per cantilever is 500kg. The unit load capacity (total load capacity between two uprights) is 3000kg.

This cantilever rack is characterised by its particularly robust construction. The surface of this rack is galvanised and therefore weatherproof. This makes it particularly suitable for use outdoors, in cold stores or similar.

With this integrated shelf it’s even easier to flexibly use your existing TOPREGAL cantilever racks to create additional storage space. The galvanised mesh shelf is fixed at the front and at the back and secured against possible slipping with two fixing brackets which are included in the delivery volume. With the fixing brackets, the load-bearing capacity of the shelf is up to 500kg.

Using the shelf, the rack can be loaded with pallets, barrels, parcels, transport boxes or other stored goods, for example. In addition, the shelves prevent goods from falling and long goods from sagging between the cantilevers.

To protect the load from accidental slipping, roll-off protection can be attached at the end of the cantilever. This is included as standard in the delivery volume. The cantilevers can be attached at individual heights in 50mm increments and are secured with safety bolts and pins.

The external dimension of this rack is 19.2m.
The axial dimension (inner dimension between two uprights) is always 150cm.

All individual parts used in this product correspond to our cantilever rack range and are thus compatible and expandable.
Delivery volume
  • 13 complete uprights 3.5m high for 100cm cantilevers double-sided up to 3000kg (galvanised)
  • 12 cantilever-rack units (struts) for 3.5m height, axial dimension 1.5m (galvanised)
  • 130 cantilevers 100cm deep up to 500kg (galvanised)
  • 120 cantilever-rack galvanised mesh shelves incl. support bar for KR3000 / 100cm deep for unit width 150cm
  • All material required for assembly such as foot plates, screws, nuts, bolt anchors is included
  • Load capacity labels according to DGUV 108-007 (formerly BGR 234) specifications
  • Assembly instructions
Discounts of up to 10%
on the value of your cart!
Overview / specification
  • Width
    19,2m
  • Height
    350cm
  • Depth
    100cm
  • Number of layers
    5 levels
  • Max. load per layer
    500kg
  • Version
    double-sided
  • Rack layer
    Galvanised mesh
  • Surface
    Galvanised
  • Suitable shelf for any load
  • Easier assembly due to modular design
  • Individually configurable
  • All small parts & load capacity labels included
Load distribution

All data refer to evenly distributed loads. When loading your shelves, the load capacity for the compartment and the unit must not be exceeded. In principle, the current guidelines on health and safety at work (DGUV 108-007 / BGR 234) apply when using our shelves. TOPREGAL does not accept any liability for accidents/damage caused by improper use. Our expert team of consultants will be happy to answer any questions you may have.

Dimensions given are approximate and may vary by a few centimetres. Please contact us if you need the exact dimensions for your desired shelf.