3.3m cantilever rack (type: KR3000 painted) 3m high single-sided with 3 levels 100cm deep
Discounts of up to 10%
on the value of your cart!
on the value of your cart!
-
Width3,3m
-
Height300cm
-
Depth100cm
-
Number of layers3 levels
-
Max. load per layer500kg
-
Versionone-sided
-
Rack layerWithout
-
SurfacePainted
New, complete cantilever rack – single-sided design – 3.3m wide, 300cm high and 3 cantilever levels with a cantilever depth of 100cm. The maximum load per cantilever is 500kg. The unit load capacity (total load capacity between two uprights) is 1500kg.
This cantilever rack is characterised by its particularly robust construction.
The surface of this upright is powder-coated (painted). This makes it particularly suitable for use in dry indoor areas, warehouses or similar.
The foot parts can also be used as a storage level
To prevent the load from accidentally slipping, roll-off protection can be attached at the end of the cantilever. This is included as standard in the delivery volume. The cantilevers can be attached at individual heights in 50mm increments and are secured with safety bolts and pins.
The external dimension of this rack is 3.3m.
The axial dimension (inner dimension between two uprights) is always 150cm.
All individual parts used in this product correspond to our cantilever rack range and are thus compatible and expandable.
This cantilever rack is characterised by its particularly robust construction.
The surface of this upright is powder-coated (painted). This makes it particularly suitable for use in dry indoor areas, warehouses or similar.
The foot parts can also be used as a storage level
To prevent the load from accidentally slipping, roll-off protection can be attached at the end of the cantilever. This is included as standard in the delivery volume. The cantilevers can be attached at individual heights in 50mm increments and are secured with safety bolts and pins.
The external dimension of this rack is 3.3m.
The axial dimension (inner dimension between two uprights) is always 150cm.
All individual parts used in this product correspond to our cantilever rack range and are thus compatible and expandable.
- 3 complete uprights 3m high for 100cm cantilevers single-sided up to 1500kg (painted RAL 5005)
- 2 cantilever-rack units (struts) for 3m height, axial dimension 1.5m (painted RAL 5005)
- 9 cantilevers 100cm deep up to 500kg (painted RAL 5005)
- All material required for assembly such as screws, nuts, bolt anchors as well as assembly instructions and load capacity labels are included
Discounts of up to 10%
on the value of your cart!
on the value of your cart!
-
Width3,3m
-
Height300cm
-
Depth100cm
-
Number of layers3 levels
-
Max. load per layer500kg
-
Versionone-sided
-
Rack layerWithout
-
SurfacePainted
-
Suitable shelf for any loadEasier assembly due to modular designIndividually configurableAll small parts & load capacity labels includedSuitable products
×