11,2 m cantilever rack KR3000 / hot-dip galvanised / one-sided / 2 m high / 50 cm cantilever depth / 5 levels
★ ★ ★ ★ ★
★ ★ ★ ★ ★
(17)
- Efficient storage of goods such as wooden boards or tubes
- Extra-robust design
- Huge load capacity of up to 1.500 kg per unit
- Cantilevers can be attached individually in increments of 50 mm
- Efficient storage of goods such as wooden boards or tubes
- Extra-robust design
- Huge load capacity of up to 1.500 kg per unit
- Cantilevers can be attached individually in increments of 50 mm
-
Width11.200 mm
-
Height2.000 mm
-
Depth500 mm
-
Number of levels5
-
Beam length1.500 mm
-
Max. Load per field1.500 kg
-
Versionone-sided
-
Rack layerwithout
-
Surfacehot-dip galvanised
-
ModelKR3000
-
Range of applicationOutdoor
-
BrandTOPREGAL
- 8 x upright / 2 m high / max. load 1.500 kg (type: KR3000 galvanised)
- 7 x cantilever rack unit (strutting) for 2 m height, axial dimension 1.5 m (type: KR3000 galvanised)
- 40 x cantilever 500 mm deep up to 500 kg (type: KR3000 galvanised)
- All material required for assembly
- Load capacity labels in accordance with German DGUV 108-007 specification (formerly BGR 234)
- 5 years warranty
- Efficient storage of goods such as wooden boards or tubes
- Extra-robust design
- Huge load capacity of up to 1.500 kg per unit
- Cantilevers can be attached individually in increments of 50 mm
The TOPREGAL cantilever racks KR3000 feature a particularly robust, modular and flexible design.
This cantilever rack in a single-sided design with a width of 11,2 m is 2 m high, with an overall depth of 80 cm, and features 5 cantilever levels, with a cantilever depth of 50 cm. The maximum load per cantilever is 500 kg. The cantilevers can be attached at individual heights in increments of 50 mm and are secured with safety bolts and pins. The foot parts can also be used as a storage level (depending on the goods). To protect the load from accidentally slipping, roll-off protection can be attached at the end of each cantilever. This is included as standard in the delivery volume.
The maximum unit load capacity (even total load between two uprights) is 1.500 kg.
The axial dimension (inner dimension between two uprights) is generally 150 cm. At specific widths, the rack ends with a unit with an axial dimension of 100 cm. Best of all, you can extend your rack in terms of width or number of levels at any time.
The surface of this rack is galvanised and therefore weatherproof. This makes it particularly suitable for use outdoors, in cold stores, in corrosive environments or similar.
This cantilever rack of the KR3000 type has no shelf support.
Important information about our racks
All data refer to evenly distributed loads. When loading your shelves, the load capacity for the compartment and the unit must not be exceeded. In principle, the current guidelines on health and safety at work (DGUV 108-007 / BGR 234) apply when using our shelves. TOPREGAL does not accept any liability for accidents/damage caused by improper use. Our expert team of consultants will be happy to answer any questions you may have. Dimensions given are approximate and may vary by a few centimetres. Please contact us if you need the exact dimensions for your desired shelf.
Your order is usually and depending on stock immediately after receipt of order or payment (depending on the selected payment method) within 24h handed over to the shipping company. The delivery time from this point nationwide is max. 72h (international shipping correspondingly longer). If you have selected an advice, the shipping company will contact you at least one day before delivery to coordinate the delivery date.
.jpg)
